Reverse osmosis process uses semi permeable spiral wound membranes to separate and remove dissolved solids, organic, pyrogens, sub micron colloidal matter and bacteria from water. Feed water is delivered under a pressure of approximately 16 kg/cm2 through reverse osmosis membranes. Water permeates the minute pores of the membrane and is delivered as purified water. Impurities in the water are concentrated in the reject stream and flushed to drain. Reverse osmosis is capable of removing 90-99% of total dissolved solids (TDS), 99% of organic, including pyrogens, and 99% bacterial in the feed water.

* Raw water Range we can do : Brackish water TDS less than 20000ppm, ground/well water, city water,rains,river/lake water ... or according to customer's requirements

* Capacity we can do ; 500lph ,1000lph,2000lph,3000lp.. . 50000lph,or according to customer's requirements

* O utput water application: drinking/irrigating water, commercial bottled selling water,human consumption drinking water...or according to customer's requirements

Main Features:

1.RO system uses imported USA DOW membrane.
2.No need chemical to regeneration,easy operation and maintain.
3.Water production continuously;Fully automatic; High efficiency.
4.Automatic switch on when lack of water,and switch off when no water or full of water.
5.RO membrane auto wash and reduce the pollution speed.
6.Low-pressure switch protects high-pressure pump from damage cause by water supply stops.
7.Production water conductivity meter and PH monitors water quality online continuously.

· Please tell us the raw water/source of wate(tap water, underground water...)

· Please Provide water analysis report if it is ok for you

· Please tell us required production capacity( 500 liters per hour, 1000liters per hour…)

· What's the pure water used for( drinking, bottle water or industrial use…)