Anaerobic Adhesive Good Solvent Resistance, Mechanical Glue Epoxy Resin

Model NO.
HTL-340B
Classification
Room Curing
Main Agent Composition
Methacrylate
Characteristic
Weatherability
Promoter Composition
Solvent
Composition
Organic Material
Color
Red
Transport Package
Plastic Tube in Carton
Specification
50g; 250g
Trademark
Hantec
Origin
China
HS Code
3506919090
Production Capacity
300000tons
Reference Price
$ 0.58 - 0.69
Contact Us

Product Description

Anaerobic adhesive Hantec-340B

PRODUCT DESCRIPTION

The Hantec-340B is a universal, medium viscosity, high strength adhesive. It is suitable for transition, interference or clearance fit. Hold the key and shaft, bearing, small motor rotor shaft, bushing, improve the fit strength of pressure fit, repair worn hole - shaft fit or out of tolerance parts, screw lock seal.
 
Typical use for bearing and sliding fitting assembly fixed. It is used for fixing cylindrical parts with maximum radial clearance of 0.10mm. Typical applications: general purpose, holding key and shaft, bearing, small motor rotor shaft, bushing, sealing of threaded parts and filling of sand holes.
 

Main technical parameters

Pre-curing characteristic
Project average value range
Colour tawny
Main chemical composition methacrylate
Viscosity (mPa·s) 500 500~2500
Density (g/cm³) 1.1 1.0-1.15
  Flash point (ºC)       ≥93  
  Maximum filling clearance (mm)   0.06   0.05-0.10  
  Tack time (min)   10   5~30min/24h  
Post-curing characteristic
Curing time at room temperature(h) 24 24±3
Destabilizing moment (N.m) 15 15.0~30.0
Mean disassembly moment (N.m) 25 15.0~40.0
Work Temperature(ºC)   -55~150   -55~150  

 

Chemical/solvent resistance

The glue is placed under the following conditions and tested at 22ºC
solvent TemperatureºC Initial intensity residual rate %
After 100h After 500h Afte 1000h
engine oil 125 100 100 100
unleaded gasoline 22 100 100 95
ethyl alcohol 22 100 90 90
acetone 22 95 95 95
Sodium hydroxide 10% 40 100 100 70
Hydrochloric acid 10% 40 100 100 100
Water/ glycol (50%/50%) 87 100 85 85

 

Usage

a) Grease should be removed and cleaned at the glue-coated parts. Metal cleaner is recommended;
b) Uniformly apply the glue solution to the joint part of the workpiece and assemble it according to the conventional method;
c)Set at room temperature for 24 hours;
d)If stored for a long time, shake well when used.

 

Matters need attention
A) Do not pour the poured gel solution back into the original bottle to avoid contaminating the gel solution.
B) This product contains acrylic acid and hydroxypropyl methacrylate, which can irritate the skin and eyes.
C) In case of accidental contact with eyes and skin when using this product, rinse immediately with clean water.
D) This product should not be used on plastics.

Storage
a) Store in a cool and dry place at 8 ~ 28ºC.
b) Shelf life: two years

Packing specification
50g/piece;250 g/piece

*Note: The performance data above are typical data measured in a laboratory environment with temperature of 25ºC and humidity of 70%. They are only for reference and cannot be guaranteed to be achieved in a specific environment. Please refer to the actual test data when using.
 

Company Information:

Guangdong Shunde Hantec Building Materials Co., Ltd was established in 2013, located in the hinterland of the pearl river delta--Shunde, Guangdong, Hantec is one the biggest construction materials manufacturers, which is specialized in research, development, production, and sales of environmental-friendly building materials.
Anaerobic Adhesive Good Solvent Resistance, Mechanical Glue Epoxy Resin
Anaerobic Adhesive Good Solvent Resistance, Mechanical Glue Epoxy Resin

Since inception, Guangdong Shunde Hantec Buliding Materials Co., Ltd always insist on the ISO9001 and ISO 14001 International Standard, fully implementing the elaborating management, we focus on the building materials, furniture manufacturing, decoration, shoe and leather industry; Paints, hardware accessories, energy-saving building materials and other construction materials. "Focus on quality, care for the human beings", Hantec provides high-performance products and solutions to its clients and customers. It is devoted to satisfying the color or effect preferences in various fields of household environments as well as decorating and protecting people's health. The main raw materials are importing from some foreign famous suppliers, such as Bayer in Germany, DuPont in USA, LG in South Korea, etc. Our products quality stable, price reasonable, the indicators are better than China National Standard. Our brand "HANTEC" is sold well all over China domestic market, as well as exporting to North America, Southeast Asia, Middle-East Australia, Africa, and spreaded over 60 countries and regions. Hantec is always committed on the good quality, reasonable price, excellent service, also with the healthy environmental protection concept, to be one the best suppliers in China, as well as the benchmark of the whole industry. We are eager to be a highly social sense of responsibility company, will joint the effects of all colleagues, making the first brand of Chinese Construction building materials. Hantec, leading a happy new healthy life!  

Anaerobic Adhesive Good Solvent Resistance, Mechanical Glue Epoxy Resin





Arrow Huang/Sales Manager
Guangdong Shunde Hantec Building Materials Co.,Ltd
Hantec (HK) Trading Limited.
Add: Room No. 19D01-03, Construction Building, 
No, 121 of Yanjiang North Road, Daliang Town, 
 Shunde District, Foshan, Guangdong, CN


 

Adhesive