XFD Series Laboratory Flotation Cell

Description
 

The XFD series single cell lab flotation cell have three types: XFDI, XFDII, XFDIII. 

XFDIII small flotation cell: It is the highest grade type. It uses inverter technology, variable speed impeller, digital display, and also change from the outside air to intake inflated with precise adjusted, clear and stable display.

According to user needs, it can be equipped with a heater, temperature control device to control, display tank mine fluid temperature at any time.

XFDIII small flotation cell can be equipped with additional water level automatically adjusts automatically administration and other devices, can achieve a higher level of automation. Gas of pump tank supply to the rotor agitation, and mix with ore fluid, the stator is cut to produce tiny bubbles mineralization Rotor speed is stepless and can be adjusted by inverter. Fixed flotation tank fasten by hand wheel drive screw clamp.Shaving foam body, its trajectory is a circular motion. Applied in geology,metallurgy,building materials,chemical and other industrial laboratory flotation ore with a small amount.
Working Principle
Before operation, check whether the main shaft turns clockwise. If not, then change phase sequence of the power source to make the motor turns clockwise before operation. 

Mix mineral samples and water and then pour them into the cell. Start up the motor to drive the main shaft for rotation. The impeller will agitate in the cell. Then open the valve for air inflation and add chemical agent to form foams. Turn on switch of the scraper motor (8) for rotation of the scraper to scrape foams out of the cell. A box is set on the working table to receive foams. Minerals needed can be obtained after processing of the foams.