HOME
Arrester
12kv, 17kv Three-Phase Outdoor Ceramic Lightning Arrester
Model NO.
Y5WZ(R)
Shape
Gyro Type
Material
Ceramic
Certification
ISO9001, CCC
Transport Package
PCB
Trademark
DGG or no brand or OEM
Origin
Zhejiang - China
Production Capacity
100000PCS/Year
Reference Price
Please contact us for quote
Contact Us
Description
Product Description
LIGHTNING ARRESTER
The lightning arrester is the basis for insulation coordination of various electrical equipment (such as transformer, reactor, capacitor, generator, motor, PT, CT, circuit breaker, contactor, etc.) in the power system. The internal and external insulation indexes (short-time power frequency withstand voltage, lightning impulse withstand voltage, operation impulse withstand voltage, etc.) of all electrical equipment in the power system are determined by the protection performance of the lightning arrester.
PURPOSE AND EXECUTIVE STANDARD
This product is used in power generation, transmission, transformation, and distribution systems of AC 220kV and below, and is used to limit the amplitude of lightning and internal switching overvoltage of the system to the specified level. It is the basic equipment for insulation coordination of the entire system. At the same time, this product cannot be used to limit resonance overvoltage, and other methods are required for system harmonic elimination.
The model of this product is prepared in accordance with JB/T 8459-2006 Preparation Method of Arrester Product Model and gapless products shall comply with GB 11032-2000 AC Gapless Metal Oxide Arrester;
The products with gaps shall comply with the standard of Metal Oxide Surge Arresters with Series Gaps (J B/T 9672-2005).
Important parameters and configuration methods not clearly defined in the above standards shall be corrected according to the requirements of DL/T 620-1997 Overvoltage Protection and Insulation Coordination for AC Electrical Installations.
The normal use conditions of conventional products are as follows:
Ambient temperature: no higher than+40 ºC, no lower than - 40 ºC;
Altitude: no more than 3000 m;
Power frequency: 50 ± 2Hz; 60±2Hz;
Maximum wind speed: 35m/s;
Cleaning-free conditions: areas with medium pollution and below;
For gapless products, the power frequency voltage applied for a long time shall not exceed the continuous operation voltage of the arrester;
For products with gaps, the short-time power frequency voltage rise at the installation point shall not exceed the rated voltage of the arrester.
If the arrester is used for a long time under the following abnormal conditions, it shall be specially made, and it shall be stated when ordering:
The temperature or altitude exceeds the standard (such as plateau, tropical zone, cold zone, fully enclosed cabinet, close to an electric furnace, etc.);
The use environment has serious moisture or corrosive gas impurities (such as water, salt fields, chemical plants, etc.);
Strong ultraviolet radiation (such as plateau, drought area with strong sunshine, etc.);
Extremely polluted areas (such as mine working face, construction site working face, etc)
MODEL AND MEANING
OUTLINE AND INSTALLATION DIMENSION
Arrester
280mm Bolt, Machine 3/4 X 28"
10ka Whole House Power Surge Protective Device Surge Lightning Arrester
Yh10W-2456.246kv 10ka Surge Arrester
24kv/ 5ka Polymeric Housed Zinc Oxide Surge Arrester
66kv Porcelain Lighting, Ceramic Metal Oxide Surge Arrester, La Station
Class I with Remote and Indicator 50kA Surge Protective Device
10ka -20ka 3p SPD Three Phase Lightning Surge Protector Device
New Electronic Devices 50kA 4 Poles Surge Protection Device
Cj-T2-40 385V 20-40ka 3p+N Lightning Strikes Arrester Surge Protective Device SPD
12kv/ 5ka Polymeric Metal Oxide Surge Arrester
Lightning Arrestors
T2 AC SPD Surge Protective Device 5ka 10ka
65ka 280V 1p Gada CE Certification Lighting Surge Protectors SPD
3p 4p 250A 400A 630A Plastic Moulded Case Circuit Breaker
High -Voltage Isolate Switch 35kv 1250A
30kv 10ka Lightning Arrester Polymer Housed Gapless MOV Surge Arrester