6/4F-HH Metal Liner High Head slurry pump HH TYPE
Direct Factory of slurry pump, sand gravel pump , dredging pump and OEM Service with 30 years producing experience
HH High Head Mining Slurry Pump
Description
Name:
NP-HH High Head Slurry Pump
Pump Type:
centrifugal
Drvie Type:
ZVz/CRz/CV/DC
Power:
motor/diesel
Discharge Size:
1to 6 inch
Capacity:
16.2-1008m³/h
Head:
25-118m
Material
:High Chrome White Iron Cr27%
Main Pump Model :
1.5/1C-HH 3/2D-HH 3/2DD-HH 4/3E-HH 4/3EE-HH 6/4F-HH 6/4FF-HH 6/4x- HH 6S-H 8/6S-H 8/6X-H 6S-HP 8/6S-HP 8/6X-HP
Type Notation :
6X4F-NP-HH
6----- Suction Diameter(Inch)
4 ------ Discharge Diameter(Inch)
NP---- ShiJiaZhuang NaiPu Pump Co.,Ltd
HH ------ High Head Slurry Pump
NP-HH SLURRY PUMP PERFORMANCE PARAMETERS
Type
|
Allowable Mating Max. Power(Kw)
|
Clear Water Performance
|
Impeller
|
Capacity/Q m³/hr
|
Head/m
|
Speed/rpm
|
Max Efficiency/%
|
NPSH/m
|
Nos of Vane
|
Impeller Diameter/mm
|
1.5X1C-NP-HH
|
30
|
16.2--34.2
|
25-92
|
1400--2200
|
20
|
2--5.5
|
5
|
330
|
3X2D-NP-HH
|
60
|
68.4--136.8
|
25-87
|
850--1400
|
47
|
3-7.5
|
5
|
457
|
4X3E-NP-HH
|
120
|
126-252
|
12-97
|
600-1400
|
50
|
2-5
|
5
|
508
|
6X4F-NP-HH
|
560
|
324-720
|
30-118
|
600-1000
|
64
|
3-8
|
5
|
711
|
8X6S-NP-HH
|
560
|
468-1008
|
20-94
|
500--1000
|
65
|
4-12
|
5
|
711
|
Feature:
1. HH Horizontal Slurry Pumps are 100% fully interchangeable with the most common slurry pump design in the mining industry
2. NP- HH Slurry pump is a horizontal double-shell axial suction centrifugal slurry pump.
3. The discharge of the pump can be installed every intervals of 45° Rotating eight direction within 360°
4. The HH slurry pump can deliver strong abrasive slurry in a small flow low head region, that is, in a region where the rotational speed is lower than 50% of The maximum rotational speed of the pump and the outlet flow rate of the pump is less than 8 m/s. In the high head large flow area,The Pump can transport light abrasive slurry.
5. All Standard seal options are available of centrifugl , gland or mechanical type.
6. HH High Head slurry pump sizes range from 25mm discharge size through to 150mm
7. The impeller and liner for HH High Head Slurry Pump are adoptable of wear resistant metal only.
HH Metal Liner High Head slurry pumps are widely used in mining, power, metallurgy, coal, deading, building material and other industrial lines to pump concentrate, tailings, sludge and other abrasive, high density slurries.
Tailings Delivery
Cyclone Feed
Diamond Concentrate
Slag Granulation
Bottom Boiler and Fly Ash
Mill Discharge
Construction for HH High Head Slurry Pump
Main Part Number At The Drawing
032
:
Frame Plate
110
:
Volute Liner
041
:
Frame Plate Liner Insert
124: Volute Cover Seal
122: Stuffing Box Seal
|
132
:
Discharge Joint
147
:
Impeller
013
:
Cover Plate
083
:
Throat bush
060: Intake Joint
|
Materials of Construction
|
LINERS
|
IMPELLERS
|
CASING
|
BASE
|
EXPELLER
|
EXPELLER RING
|
SHAFT SLEEVE
|
SEALS
|
Standard
|
Chrome Alloy
|
Chrome Alloy
|
SG Iron
|
SG Iron
|
Chrome Alloy
or
SG Iron
|
Chrome Alloy
or
SG Iron
|
SG Iron
|
Rubber
|
Company Profile
ShiJiaZhuang NaiPu Pump Co.,Ltd , Is one of professional factory of
slurry pump, sand gravel pump , dredging pump , Water pump and spare parts .
NaiPu Pump is devoted to pump solution industry for more than 30 years!
The Pumps are widely used in in metallurgy, mining, Nonmetallic Mining, Coal, Energy
resources, Sand mining, Dredging, Environmental protection, Petrochemical engineering, Flue gas desulfurization and other industrial departments.
The Pumps have been exported to USA, Canada, Germany, Russia , Australia, South Asia, North America, South Africa, and etc , up to more than sixty countries.
Main Pump Model
Metal Liner Heavy Duty Slurry Pump AH TYPE ↓
1.5/1B-AH 2/1.5B-AH 3/2C-AH 3/2CC-AH 4/3C-AH 4/3CC-AH 4/3D-AH 4/3DD-AH 6/4D-AH 6/4DD-AH 6/4E-AH 6/4EE-AH 8/6E-AH 8/6EE-AH 8/6F-AH 8/6FF-AH 8/6R-AH 10/8ST-AH 10/8F-AH 10/8FF-AH 12/10ST-AH 12/10G-AH 12/10F-AH 12/10FF-AH 14/12ST-AH 14/12G-AH 14/12FF-AH 14/12F-AH 16/14TU-AH 20/18TV-AH
Rubber Liner Heavy Duty Slurry Pump AH TYPE ↓
1.5/1B-AHR 2/1.5B-AHR 3/2C-AHR 3/2CC-AHR 4/3C-AHR 4/3CC-AHR 4/3D-AHR 4/3DD-AHR 6/4D-AHR 6/4DD-AHR 6/4E-AHR 6/4EE-AHR 8/6E-AHR 8/6EE-AHR 8/6F-AHR 8/6FF-AHR 8/6R-AHR 10/8F-AHR 10/8X-AHR 12/10ST-AHR 14/12ST-AHR 16/14TU-AHR
Metal Liner Vertical Slurry Pump SP TYPE ↓
40PV-SP 65QV-SP 100RV-SP 150SV-SP 200SV-SP 250SV-SP
Rubber Liner Vertical Slurry Pump SP TYPE ↓
40PV-SPR 65QV-SPR 100RV-SPR 150SV-SPR 200SV-SPR
Metal Liner High Head slurry pump HH TYPE ↓
1.5/1C-HH 3/2D-HH 3/2DD-HH 4/3E-HH 4/3EE-HH 6/4F-HH 6/4FF-HH 6/4x- HH 6S-H 8/6S-H 8/6X-H 6S-HP 8/6S-HP 8/6X-HP
Metal Liner (Rubber Liner)Slurry Pump M TYPE ↓
10/8E-M(R) 10/8R-M(R)
Metal Liner (Rubber Liner)Frothy Slurry Pump AF TYPE ↓
2QV-AF(R) 3QV-AF(R) 6SV-AF(R) 8SV-AF(R)
Metal Liner Gravel Pump G TYPE ↓
6/4D-G 6/4DD-G 6/4E-G 8/6E-G 8/6EE-G 10/8F-G 10/8FF-G 10/8S-G 12/10F-G 12/10FF-G 12/10G-G 14/12F-G 14/12FF-G 14/12G-G 10/8S-GH 10/8F-GH 10/8FF-GH 12/10G-GH 12/10F-GH 12/10FF-GH 14/12G-G 14/12T-G 18/16 T-G
Metal Liner (Rubber Liner ) Slurry Pump L TYPE ↓
20A-L 50B-L 50B-LR 75C-L 100D-L 150E-L 300S-L
Main Slurry Pump Parts :
Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.
OEM Service
Based on many years of rich experience in slurry pump manufacturing and design, NAIPU can undertake OEM customization for the whole set of pump and various spare parts.
Not only for pump and spare parts , also for other others mining wear parts. we have done many special spare parts for customer. Like Crusher spare parts , Cyclone parts , ball mill Liner . Material can be High chrome alloy , Stainless steel , Ductile Iron, Alloy 20, Hastalloy C and so on
Our Service
1.
Quick Reply
Your inquiry related to our products or prices will be
replied within 12 hours.
2.
Pump Choice .
We can help to select the suitable pump
3.
Technical Surport .
We have a group of high quality technicians with rich experience who can solve everything during the whole process.
4.
Guarantee quality.
All the products have proved by ISO 9001:2008, CE, SGS. And also will be inspected strictly before delivery.
5.
Perfect after -sales
.
We will be responsible for the whole life period
6.
OEM order.
Many material are available ,like High chrome, rubber , stainless steel and etc.Steely alloy.
Welcome to contact us
Shijiazhuang Naipu Pump Co., Ltd
Contact person : Kitty Liu