Tisco/Posco/Baosteel Cold Roll 201 430 304 430 440c Stainless Steel Coil

Model NO.
440C
Mtc
En 10204/3.1
Edge
Mill Edge or Slit Edge
Surface
2b, No.1, 1d, 2D, Hl, 8K, Ba, Sb
Width
1000*C/1220*C/1250*C/1500*C/1540*C/1800*C/2000*C
Length
in Coil
Thickness
0.3mm to 16mm
Transport Package
as Customer′s Requirement
Trademark
ZYTC
Origin
China
HS Code
72192300
Production Capacity
500 Tons/Month
Reference Price
$ 1,260.00 - 1,692.00
Contact Us

Product Description

1: Product Details
Tisco/Posco/Baosteel Cold Roll 201 430 304 430 440c Stainless Steel Coil
Tisco/Posco/Baosteel Cold Roll 201 430 304 430 440c Stainless Steel Coil
Grade 440C stainless steel is a high carbon martensitic stainless steel. It has high strength, moderate corrosion resistance,
and good hardness and wear resistance. Grade 440C is capable of attaining, after heat treatment, the highest strength,
hardness and wear resistance of all the stainless alloys. Its very high carbon content is responsible for these characteristics,
which make 440C particularly suited to such applications as ball bearings and valve parts.
Corrosion Resistance:
*Good resistance to the atmosphere, fresh water, foods, alkalies and mild acids. Best resistance in the hardened and tempered
and passivated condition. A smooth polished surface also assists.
*The corrosion resistance of grade 440C approximates that of grade 304 in many environments.
Heat Resistance:
*Not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical
properties by over-tempering.
Heat Treatment:
*Annealing - Full anneal - 850-900°C, slow furnace cool to about 600°C and then air cool. Sub-critical Annealing - 735-785°C
and slow furnace cool.
H*ardening - Heat to 1010-1065°C, followed by quenching in warm oil or air. Oil quenching is necessary for heavy sections.
Immediately temper at 150-370°C to obtain a wide variety of hardness values and mechanical properties as indicated in the
accompanying table.
*Tempering in the range 425-565°C is to be avoided because of reduced impact resistance and corrosion resistance.
Tempering in the range 590-675°C results in lower hardness (the product become machinable) and high impact resistance.
Welding:
*If welding is necessary pre-heat at 250°C and follow welding with a full anneal. Grade 420 filler will give a high hardness
weld (although not as high as the 440C), but 309 or 310 will produce soft welds with higher ductility.
Machining:
*In the annealed condition this grade is relatively easily machined; approximately the same as for high speed steel.
Chips are tough and stringy so chip breakers are important. If these grades are hardened machining becomes more
difficult and probably impossible.

Other Grades:
201,202,21-4N,301,302,301L,303,303Se,304,304L,304H,304LN,304N,305,S38400,308,309,309S,310,310s,
316,316L,316H,316Ti,316N,316LN,317,317L,317LMN,317LN,321,321H,347,347H,S3100,S31803,S3205,
S32304,S31200,S31260,S32507,405,409,429,430,430F,434,444,403,410S,410,416,420,420F,431F,440A
440B,440C,440F,610,630,631,632,635,660,Alloy 200,Monel 400 ,Alloy K-500 ,Inconel 600 , Incconel 601,
Inconel 625 , Inconel 718 , Alloy 800 ,Alloy 800H,Alloy 800HT,Inconel 825,Alloy 276, Alloy 20, Alloy 59

2:  Chemical Composition  
Ti anjin Zhongyantiancheng Steel Co.,Ltd
Commodity Stainless Steel Coil/Stainless Steel Roll
Material 440C
Standard GB  JIS ASTM/ASME DIN
9Cr18/11Cr17 SUS 440C 440C 1.4125
Chemical Composition C Mn P S
0.95-1.20 <=1.00 <=0.040 <=0.03
Si Cr Mo  
≤1.00 16.0-18.0 <=0.75  
Thickness 0.3mm--6mm(cold rolled) 3mm--16mm(hot rolled)
Width 1000mm--2200mm
Surface BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D
manufacture Hot Rolled/Cold Rolled
Packing Packed in bundles with standard export sea-worthy package
Delivery Time Within 15 working days, according to customers' quantities
Quality High Quality.SGS inspection is accepted if needed
Place of Origin Tianjin
Productivity 500 MT/Month
Payment T/T,L/C
MOQ 1 MT
Application  High quality knife blades,Surgical instruments,Valve seats,Chisels
Note We can also do other materials

3: Stainless Steel Coil Process 
Tisco/Posco/Baosteel Cold Roll 201 430 304 430 440c Stainless Steel Coil

4: Package & Shipping

Tisco/Posco/Baosteel Cold Roll 201 430 304 430 440c Stainless Steel Coil


5: Conpany Introduction
  Tisco/Posco/Baosteel Cold Roll 201 430 304 430 440c Stainless Steel Coil
Tisco/Posco/Baosteel Cold Roll 201 430 304 430 440c Stainless Steel Coil
6: Contact Us 





  

 

Stainless Steel