TYPE | Allowable Mating Max. Power(KW) | Material | Clear Water Performance | Impeller | ||||||
Liner | Impel | Capacity Q |
Head
H
(m) |
Speed
N
(r/min) |
Max. Eff(%) | No. of Vanes S | Dia.(mm) | |||
M ³ /h | l/s | |||||||||
40PV-SP | 15 | M | M | 19.44-43.2 | 5.4-12 | 4.5-28.5 | 1000-2200 | 40 | 5 | 188 |
65QV-SP | 30 | M | M | 23.4-111 | 6.5-30.8 | 5-29.5 | 700-1500 | 50 | 5 | 280 |
100RV-SP | 75 | M | M | 54-289 | 15-80.3 | 5-35 | 500-1200 | 56 | 5 | 370 |
150SV-SP | 110 | M | M | 108-479.16 | 30-133.1 | 8.5-40 | 500-1000 | 52 | 5 | 450 |
200SV-SP | 110 | M | M | 189-891 | 152.5-247.5 | 6.5-37 | 400-850 | 64 | 5 | 520 |
250TV-SP | 110 | M | M | 261-1089 | 72.5-302.5 | 7.5-33.5 | 400-750 | 60 | 5 | 575 |
300TV-SP | 200 | M | M | 288-1267 | 80-352 | 6.5-33 | 350-700 | 50 | 5 | 610 |
Note
: 1."M"
Stands for Alloy wear-resistant material
;
"
R
"
stands for rubber
2. Capacity range recommend 50%Q'≤Q≤110%Q' (Q'≈ Appropriate capacity at highest efficiency point ) 3.NPSH is the value at the Q point with highest speed . |