Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures.
The compositional range for Inconel 600 is provided in the table below.
|
Element |
Content |
|
Nickel (Ni) |
72 % min |
|
Chromium (Cr) |
14 - 16 % |
|
Iron (Fe) |
6 - 10 % |
Typical properties of Inconel 600 are covered in the following table.
|
Property |
Metric |
Imperial |
|
Density |
8.47 g/cm 3 |
0.306 lb/in 3 |
|
Melting point |
1413 °C |
2575°F |
|
Co-Efficient of Expansion |
13.3 µm/m.°C
|
7.4x10
-6
in/in.°F
|
|
Modulus of rigidity |
75.6 kN/mm 2 |
10965 ksi |
|
Modulus of elasticity |
206 kN/mm 2 |
29878 ksi |
|
Condition of Supply |
Heat Treatment (After Forming) |
|||
|
Annealed/Spring Temper |
Stress relive at 460°C (860°F) for 1hr and air cool. |
|||
|
Condition |
Approx Tensile Strength |
Approx Service Temp. |
||
|
Annealed |
600-750 N/mm 2 |
87-109 ksi |
-200 to +330°C |
-330 to +625°F |
|
Spring Temper |
900-1250 N/mm 2 |
131-181 ksi |
-200 to +330°C |
-330 to +625°F |
Note - In both cases slight magnetism may occur below -120°C (-184°F)
Inconel 600 is covered by the following standards:
• BS 3075 and BS 3076 NA 14
• AMS 5687
• ASTM B166
Inconel 600 is the tradename of Special Metals Group of Companies and equivalent to:
• W.NR 2.4816
• UNS N06600
• AWS 010
Inconel 600 typically finds application in:
• Furnace components
• Chemical processing
• Food processing and
• Nuclear engineering.
Stock
|
Form |
Specification |
Supply Form |
Others |
|
Sheet |
Thickness:0.40-4.75mm,General Width:1000,1219,1500mm |
Whole Coil or piece of it |
Cold Annealed,Surface 2B,2E |
|
Plate |
Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) |
Whole Coil or piece of it |
Single hot rolling,Solid solution annealed state,Surface 1D |
|
Belt |
Thickness:0.10-3.0mm,Width:50-500mm |
Whole Coil or Specified size |
Cold Annealed,Surface 2B,2E |
|
Bar & Rod |
Rolled barΦ5-45mm,Length≤1500mm |
Polished Bar(circle,Square) |
Solution annealing,descaling |
|
Forged barΦ26-245mm,Length≤4000mm |
|||
|
Weld tube |
Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm |
Base on your requirement |
Use for PHE |
|
Seamless Tube |
Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm |
Base on your requirement |
Use for PHE |
|
Wire |
Outer diameterΦ0.1-13mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
|
Forged piece |
roundness and square alloy |
Base on your requirement |
Steel, Alloy |
|
Flangs |
All kinds of Flangs |
Base on your requirement |
Steel, Alloy |
|
Welding Material |
Coil wire Φ0.90mm/1.2mm/1.6mm |
Base on your requirement |
Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
|
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm |
|||
|
Welding rodΦ2.4mm/3.2mm/4.0mm |
|||
|
Tube |
Elbow, three links, four links, different diameter size |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
|
Explosive bonded laminate |
Raw Sheet Thickness≥2mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611