About Thrust Needle Roller Bearing:

Thrust needle and retainer assembly are comosed of a set of tray ring gaskets combined with retainer with roller bearings.The stand leads and holds many rolling elements.The thrust needle bearings or thrust-cylindrical roller bearings can support the bearings with the axial directional load and so the can be used as the bearings with good rigidity and minium axial occupied spaces.

  If the surface of the adjacent parts can be used as a tray for the rolling needles and the holding stand assembly should be recommended when the support space is big enough so that a small axial cross sectional altitude can be achieved.Same effectiveness can be ensured in different cases when combined with the relatively thicker ring gaskets of LS,GS,WS,ZS series.The applicable gaskets series of AS,LS,GS,WS,ZS are optional and will be ordered sparately by the buyers.

Axial (Thrust) needle roller bearings are units comprising axial needle rollers and cage assemblies and axial bearing washers with a centring spigot. Axial (Thrust) needle roller bearings are able to accommodate heavy axial loads. They are insensitive to shock loads and provide a high degree of bearing units stiffness within a minimum axial space. They represent unidirectional bearings and can accommodate axial loads acting in one direction only.
 

Shandong Sitong Precision Bearing Manufacturing Co., Ltd. is located in Yandian Town, Linqing City, the largest bearing production and sales distribution center in China. The factory covers an area of more than 8000 square meters. It annually produces 850000 sets of PO and P6 (CA, CC, MA, MB, EM, 5ET, E1) high-end self-aligning roller bearings, and sets up WGYZ subsidiary in Zhuhua Industrial Park, Wafangdian City, Liaoning 

Spherical roller bearings can withstand large axial loads in both directions. This kind of bearing has self aligning function and can withstand the deflection of the neutral shaft without friction or temperature rising. The design features supplementary lubrication. Can be used in modular systems, including bearing housings, mounting sleeves and hydraulic nuts