Introduction |
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures. Chemical Composition of Inconel 600The compositional range for Inconel 600 is provided in the table below.
Typical Properties of Inconel 600Typical properties of Inconel 600 are covered in the following table.
Properties of Supplied Materials and Heat Treated Materials
Note - In both cases slight magnetism may occur below -120°C (-184°F) Relevant StandardsInconel 600 is covered by the following standards: • BS 3075 and BS 3076 NA 14 • AMS 5687 • ASTM B166 Equivalent MaterialsInconel 600 is the tradename of Special Metals Group of Companies and equivalent to: • W.NR 2.4816 • UNS N06600 • AWS 010 |
|||||||||||||||||||||||||||||||||||||||||||||||||||
Applications of Inconel 600 |
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Inconel 600 typically finds application in: • Furnace components • Chemical processing • Food processing and • Nuclear engineering. |
|||||||||||||||||||||||||||||||||||||||||||||||||||
Stock
|
Form |
Specification |
Supply Form |
Others |
|
Sheet |
Thickness:0.40-4.75mm,General Width:1000,1219,1500mm |
Whole Coil or piece of it |
Cold Annealed,Surface 2B,2E |
|
Plate |
Thickness:4.76-60mm,Width:1500,2000,2500mm,Length:3000,6000,8000,8500mm(Under 10mm plate can be coiled) |
Whole Coil or piece of it |
Single hot rolling,Solid solution annealed state,Surface 1D |
|
Belt |
Thickness:0.10-3.0mm,Width:50-500mm |
Whole Coil or Specified size |
Cold Annealed,Surface 2B,2E |
|
Bar & Rod |
Rolled barΦ5-45mm,Length≤1500mm |
Polished Bar(circle,Square) |
Solution annealing,descaling |
|
Forged barΦ26-245mm,Length≤4000mm |
|||
|
Weld tube |
Outer diameterΦ4.76-135mm,Wall Thickness0.25-4.00mm,Length:≤35000 mm |
Base on your requirement |
Use for PHE |
|
Seamless Tube |
Outer diameterΦ3-114mm,Wall Thickness0.2-4.5mm |
Base on your requirement |
Use for PHE |
|
Wire |
Outer diameterΦ0.1-13mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
|
Forged piece |
roundness and square alloy |
Base on your requirement |
Steel, Alloy |
|
Flangs |
All kinds of Flangs |
Base on your requirement |
Steel, Alloy |
|
Welding Material |
Coil wire Φ0.90mm/1.2mm/1.6mm |
Base on your requirement |
Certificate of Origin:America, Sweden, Britain, Germany, Austria, Italy, France. |
|
Straight WireΦ1.2mm/1.6mm/2.4mm/3.2mm/4.0mm |
|||
|
Welding rodΦ2.4mm/3.2mm/4.0mm |
|||
|
Tube |
Elbow, three links, four links, different diameter size |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
|
Explosive bonded laminate |
Raw Sheet Thickness≥2mm |
Base on your requirement |
Ni & Ni alloy, Ti & Ti alloy |
4. Contact us
Name: Denny Cheng
Direct line: 021-67897611