OEM Customized Centrifugal Casting Crusher Spare Parts Symons 3" Lower Step Bearing Plate
Product Description
High Manganese Casting Parts
for Symons,Sadvik , Pegson ,Telsmith and Nordberg Crushers, the crusher spares fit to your cr ushers guaranteed. but not limited what we mentioned these as below.Main products :
Crusher Bushing,Socket Liner,Piston Step Bearing,Eccentric Bushing,Main Shaft Step Bearing,Crusher Countershafte,Cone Crusher Upper Frame,Bottom Shell Bushing,Top Shell,Bottom Shell, Main Frame , Adjustment Ring , Head Assy , Bowl,Drive Gear ,Counterweight assy ,Shaft ,Pitman ,Bronze Bushing ,Pump ,Tramp Release Cylinder ,Protection Bushing , Gear and Gear & Pinion ,Jaw Crusher Fixed Jaw,Movable Jaw,Cone Crusher Mantle,Concave,Bowl Liner. Seals, Spring ,Wedge ,Toggle Plate ,and Etc .
| Our Capacity: |
|
a: Centrifugal Casting: Diameter under 4500mm
b: Continuous Casting: Diameter under 300mm c: Sand Casting: Diameter under 5000mm d: Output:30ton/day e: Finished Machining output :15ton f: Other special shaped parts can use other methods of casting or shaped moulds. |
OEM crusher parts for Crusher Model:
GP Series:
GP100 ,GP100S ,GP200,GP200s,GP300,GP300S,GP500,GP500S,GP550,GP11F,GP11M,GP220,GP330
S Series:
S2800(CS420),S3800(CS430),S4800(CS440),S6800(CS660).
| Cu Main Material | |||||||||
| Cu | Sn | Zn | Pb | Fe | Al | Mn | P | Ni | |
| C93700 | 78-82 | 9-11 | 8-11 | ||||||
| C93200 | 81-85 | 6.3-7.5 | 1-4 | 6-8 | 1 | ||||
| C95400 | >83 | 3-5 | 10-11.5 | 0.5 | 1.5 | ||||
| C95500 | >78 | 3-5 | 10-11.5 | 3.5 | 3-5 | ||||
| C90700 | 88-90 | 10-12 | |||||||
| C95300 | >86 | 0.8-1.5 | 9-11 | ||||||
| C95800 | >79 | 3.5-4.5 | 8.5-9.5 | 0.8-1.5 | 4-5 | ||||
| C93600 | 79-83 | 6-8 | 1 | 11-13 | 1 | ||||
| C86300 | 60-66 | 22-28 | 2-4 | 5-7.5 | 2.5-5 | ||||
| C83600 | 84-86 | 4-6 | 4-6 | 4-6 | 1 | ||||
On Time Delivery
Customer Satisfaction
OEM Quality of Products
Quick Inquiry Response within 12hours
Inspection
:
1.Chemical Compositions Test
2.Mechanical Properties Test
(Tensile Strength, Yield Strength, Elongation, Reduction of Area, Impact Value, Hardness)
3.Non Destructive Test (UT, MT, PT, RT)
4.Dimensional Checking
Process Flow:
We usually provide 6 Months of repair service. If our duty, we will bear the repair cost or send the replacement parts.
Q.
What's your advantage?
A:
On Time Delivery /Customer Satisfaction
OEM Quality of Products /
Quick Inquiry Response within 12hours
H
igh-quality control and fast delivery with the most competitive price
Q. What's the warranty on your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
Q. What's your delivery time?
A: Within 15-35 days after we confirm your requirement.
Q. What's the payment terms?
A: T/T,100% L/C at sight are all accepted.
Mining Machinery Parts
-
Tesab1012 Impact Crusher Wear Parts Blow Bar 2-423-3
Wear Plates Apply to Gp300 Cone Crusher Wear Parts Mantle and Concave
CH440 Cone Crusher Wear Parts Eccentric Bushing 442.8067-01
High Manganese Mining Stone Cone Crusher Parts OEM World-Class Mantle Concave
Mining Machine Cast Steel Wear Jaw Crusher C63 Spare Wear Parts
Rotor Tip and Wear Parts Suit for Sandvik CV229 VSI Crusher
Factory Direct Jaw Plate Mn18cr2 for Jaw Crushers
Mn18 Mn22 Concave and Mantle Cone Crusher Wear Part for Symo Mes
Toggle Seat for Stone Crusher/Jaw Crusher
Quality Guaranteed Cone Crusher Parts Mantle Concave N55208138 for HP200
J44 Series Crusher Wear Parts Jaw Plate P/N: 551-003-036
Customized Jaw Crusher Parts Toggle Plate
Mn13 Cheek Plate 402.4622-01 Casted for Cj815 Jaw Crusher
Good Quality Mets0 HP300 Cone Crusher Spart Part Eccentric Bushing
OEM Head Assembly Used for CH660 Cone Crusher
Mining Machine Cone Crusher MP800 Spare Parts Bowl