chassis Parameter | ||
Vehicle Model | BJ5182GSS-1 | |
size parameter | outside dimension mm | 8310×2500×3200 |
driving type | 4×2 | |
wheelbase ( mm ) | 4600 | |
tread ( F/R ) mm | 2010/1865 | |
Mass parameter | Kerb weight ( kg ) | 7004 |
Loading Weight ( kg ) | 10866 | |
Passengers | 3 | |
total weight ( kg ) | 18000 | |
The main performance parameters | Max. Speed ( km/h ) | 89 |
Max. grade ( % ) | 38 | |
Engine | Model | WP10.270E32 |
displacement ( L ) | 9.726 | |
Rated Power ( kw/rpm ) | 199/270(2200 ) | |
Max.torque/speed ( N.m/rpm ) | 1100(1200-1600) | |
transmission shaft | Model | 9JS119T-B(Q) |
Clutch | type | φ430Diaphragm spring clutch |
Rear alxe | Type / main reducer speed ratio | 13TTwo-stage deceleration/4.8 |
susppension | Number of front suspension/spring | Vertical leaf spring + cylindrical shock absorber,9 |
Number of rear suspension/spring | Longitudinal main and auxiliary leaf springs,9+6 | |
steering | AM75L | |
Braking System | Service brake type | Double loop pneumatic drum |
Parking brake type | Energy storage spring cut-off brake | |
Auxiliary brake | Engine exhaust brake | |
tire | 6+1/11.00R20 | |
Fuel tank(L) | 380 | |
basic configuration | Manual cab lift, airbag seat, manual rearview mirror glass lifter, air conditioner | |
tank capacity | ||
A.TANK BARREL | ||
1. Tank Profile | Round shape | |
2. Test pressure | Hydrostatic test to5 psi (35 Kpa) on each compartment. | |
3. Working pressure | Atmospheric. | |
4. Capacity | 10000L plus 3~5% ullage. | |
5. Compartments | Single compartment. | |
6. Interior weld finish | Not polished or grinded (W-0). | |
7. Exterior weld finish | Not polished or grinded (W-0). | |
8. Shell material | Stainless steel 304 2B. | |
a) Top | 3.7mm nominal. | |
b) Sides | 3.7mm nominal. | |
c) Bottom | 3.7mm nominal. | |
9. End Plate | Stainless steel 304 2B, 3.7mm nominal. | |
All single heads dished and flanged. | ||
10. Bulkhead | Nil. | |
11. Baffle / Surge Heads | Stainless steel 304 2B, 3.7mm nominal. | |
Dished with flap. | ||
2 pcs.2 | ||
12. Spill molding and rollover protection | Stainless steel around the dome with drain hose. | |
13. Spill molding lids | Nil. | |
14. Outer rings | 304-2B stainless steel, 60mm height, 3mm nominal, continuously welded. | |
15. Frame | Carbon steel independent. | |
16. Loaders and brackets | Carbon steel. | |
15. Isolation | Nil. | |
16. Exterior lining | Nil. | |
B. TANK FITTINGS AND PIPING | ||
1. Manholes | 20" diameter with 6 stainless steel wing nuts, located at the top center | |
2. Pressure Vacuum Vent | Two per compartment. 6~12 kPa pressure, 2~4 kPa vacuum. | |
Chinese Brand | ||
6.Foot valve | Nil. | |
7. Discharge system | 3" diameter discharge with 3" diameter butterfly valve, 3" stainless steel male camlock coupling and quick cap, located at the back of the tank. , | |
8. Piping | Nil. | |
9. Thermometer | Nil. | |
10. Steam trace | Nil. | |
11. Overfill Prevention | Nil. | |
12. Tow Hook | Nil. | |
13. Product Indicators | Nil. | |
Nil. | ||
C. ACCESSORIES | ||
1. Ladder | Stainless steel, 400 m m wide, with non skid rungs and lateral handles, mounted at right middle of tanker. | |
2. Walkway | Extruded aluminium around dome. | |
3. Hose Carries | 1 no, hose carrier (round tubes) to fit Ø159 x 6meter (236 " ) hose close type complete with brackets to be installed at the right side. | |
4. Hose | Firemen type flexible discharge hoses, 30m 2.5 " for discharge. and flexible plastics suction hoses, 5.9m 3 " for suction, 3 " female camlock coupling at both ends . | |
5. Motor Pump | BRIGGS & STRATTON Gasoline motor , 4 stroke motor, fuel tank capacity 4.0 liters of gasoline, WB30 pump with a 3 " input and outlet diameter, 7m suction head, discharge capacity 900L/min (238Gal/min) pump head pressure 33 m, weight 30kg. | |
6. Toolbox | Nil. | |
7. Rear Bumper | Aluminium member to accommodate light assembly and number plate to cover full width of the tank. | |
Steel bumper with ground clearance 500mm approx. | ||
9. Hazchem Plate | Nil. | |
10. Mudguard | Aluminum over suspension and the upper coupler. | |
Mud flaps rigid plastic at the rear. | ||
11. Lights & Wiring | 24V. ISO 1185 7 pin socket. | |
Harness: oil and vapour proof cable. | ||
Front: nil. | ||
Side: | ||
Mark lamp 3Pcs/side, LED. | ||
Reflector 3Pcs/side | ||
Turning lamp 1Pcs/side, LED. | ||
Rear Bump: | ||
Reverse lamp R-L 2Pcs, LED. | ||
Turning lamp R-L 2Pcs, LED. | ||
Brake lamp R-L 2Pcs, LED. | ||
Register plate light | ||
Rear top: nil. | ||
Brand of Wiring: Phillips | ||
12. Reverse alarm | Nil. | |
13. Connector Box | At the center in the front dishend | |
14. Sticker | 50mm wide red-white reflective sticker, mounted at both sides and rear bump. 50mm | |
15. Hand rail | Nil. | |
16. Fire Extinguisher | 8kg , 2Pcs. | |
Carbon steel extinguisher holder located on the landing gear on the curb side. | ||
17. Drains hose | water drains hose 2", installed at the back of spill molding | |
18. Wheel chocks | Nil. | |
19. Traffic cone | Nil. | |
21. Spare wheel bracket | 1set | |
Carbon steel, basket type, located behind the landing gear. | ||
21. Painting | Polyurethane medium Aluminium gray, applied over epoxy primer on carbon steel elements |