DTF Hot melt powder are specially designed to use with DTF Film Printing. Our DTF powders are slow drying and easy to cold tear. it is often used as a high-quality hot-melt adhesive in other industries. It is heated and melted in a highly elastic state at room temperature. Viscous fluid state in the later process, fast curing speed. This revolutionary technology will help you get excellent transfer printing results.

• 100% of ink absorption,
• The powder is clean,
• The designs are brightly coloured,
• Soft feel and good resilience
• Spot second delivery

Our DTF hot melt powder is used in the printing of various textiles, all kind of fabric materials and the preparation of various glues. The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.

Applications:
Resistance to wet and dry washing performance, it is especially suitable for adhesion of high elastic cloth such as , cotton, nylon, leather, EVA and many other material.
They can be printed on cotton and polyester. Design on leather, canvas, T-shirts, pillow cases, caps, gloves, sneakers, phone cases and so much more.
DTF powder or pretreat powder is a hot melt powder made of polyurethane resin and grinded into adhesive powder. It's used to cover the prints before the process of pressing begins.

1.DTF Hot melt powder is suitable for all textile printing industry.

2.DTF Hot Melt Powder is a finely ground adhesive materials specifically manufactured to increase heat transfer opacity and adhesion.

3. It is a green product that is harmless to the human body

4. Good chemical stability, can be stored at room temperature for a long time without deterioration

It can obtain excellent washing fastness (up to 60 degrees water temperature washing) and dry cleaning fastness

1. Print the design image
2. After printing, let stand 1-2 minutes
3. Sprinkle the powder onto the printed design. Make sure it is evenly distributed to all sides of the print.
4. Powder can be heated by press machine/oven/flashcuring
5. After the powder has melted like an orange peel, remove the remaining powder that sticks outside the image area
6. Next, pre-heat the shirt to the temperature of 160 degrees for 10 seconds then let it cool
7. After it cools off, put the PET film DTF on the t-shirt.
8. Press again 15 seconds for finishing

How to use DTF Pet Film Printing