Output Power

4 R@50W ( 25W+25W )

Terminating impedance:

4Ohm - 8Ohm

THD

THD <0. 2 %@1KHZ 50W

Frequency Range:

2 0HZ~20KHZ 0DB

Bluetooth name

Uhddadi

Bluetooth audio format

SBC,ACC   44.1K 16BIT

Bluetooth transmission range:

40ft(12m)

Input sensitivity:

5 00mV RMS

Power supply:

DC  24V / 3A

Use and operation

INPUT

Please disconnect the Bluetooth connection when using

Bluetooth use

No password is needed, find the "Uhddadi" device name and click connect and pair to play.

Audio input attention

This power amplifier has an energy-saving mute mode, please pay attention to the following use, otherwise it will cause no sound output

Use Bluetooth or RCA INPUT, and the volume input should not be too low, otherwise it will be muted after 1 minute

It is recommended that the volume of the external audio source is not less than 60%

Power-on precautions

Before use, make sure that the switch is OFF and the main volume is not at the maximum position. Connect all the cables, connect the antenna, and connect the power supply. Turn the switch to ON again. At this time, the power LED lights up. Start normal use.

This product only supports 24V DC power supply, using other power supplies may cause abnormalities

BASS OR Treble can only be fine-tuned The frequency response at the maximum right twist is the original value

This product is only suitable for passive speakers