Ace-165 Two-Component Silicone Sealant Non Structural Insulating

Model NO.
ACE-165
Main Agent Composition
Silicone
Characteristic
General Gap Sealing
Promoter Composition
Filler
Composition
Acrylic Sealant
Color
Black
Transport Package
Wooden Case
Trademark
ACEBOND
Origin
China
Production Capacity
500000
Reference Price
$ 481.14 - 534.60
Contact Us

Product Description

Ace-165 Two-Component Silicone Sealant Non Structural Insulating


Ace-165 Two-Component Silicone Sealant Non Structural Insulating
Ace-165 Two-Component Silicone Sealant Non Structural Insulating
 
Base  Neutral Silicone
Color Black (after mixed)
Packaging  180L+18L, 189L+18L
Net Weight  480g/Cartridge
MiXing 10:1-11:1 by volume
Shelf life 12 months
Storage Store in the cool and dry place, under 27ºC
Description ACE-165 is a two component, neutral curing, silicone sealant, specifically designed for secondary sealing of insulated glass units (IGU). Elastomer sealing with excellent weather resistance and temperature tolerance is formed by mixing and curing of the two components at the designed ratio.
Limitations

As the primary or single seal in an insulating glass unit. For structural bonding applications. In totally confined spaces. On the surface of substrate that bleeds oil, plasticizer or solvent and so on (such as impregnated wood). In contact with or exposed to sealants that liberate acetic acid. In continuous water immersion or on the surface with fog, or wet surface, or in continuous wet place When substrate surface temperature beyond 40º C or below 10º C.

Primer

Priming is not usually required when using antas-165. However, sealant adhesion should always be tested to determine the need for a primer. If required, primer should be applied in a thin film to the joint surface by using a clean lint-free cloth and allowed to dry before sealant application.

Curing and Maintenance ACE-165 begins curing when it contacts with the moisture in air. It generally cures 2mm/day, and takes 21 days for fully-cure. In the beginning of using the sealant, please remain the sealant places fixed and flat. Solvent can be used to clean the fractured sealants and then fill up with the new sealants with same color and quality.
Mixing To obtain ultimate physical properties, antas-165 should be thoroughly mixed using an airless mixing system. The cure rate may be adjusted by changing the base to the curing agent mix ratio from 9:1 to 13:1 by volume. The recommended mix ratio of the base to curing agent is 11:1.
Safety It is nontoxic after entirely cured. Avoid direct contact with eyes when operating. If happened, rinse opened eye under running water for several minutes. During the curing process, sealant will release a small amount of organic molecules. Construction should ensure good ventilation. If necessary, take protective measures. Please keep children out of reach.
Technical Data  Tack free time  1.2h
Slump 0
Hardness Shore A  45
Elastic recovery 89%
Tensile modulus   0.86MPa (23ºC)
Elongation at max load  55%
Adhesion failure area 0
Thermal weight loss  VOC 2.1%
Water 2.7%
vapor 2.25g/(m2×d)
transmission  


Operation Chart
Ace-165 Two-Component Silicone Sealant Non Structural Insulating



 

FAQ 

1, Q:Are you manufacture or simply trading company ?

A: We are the manufacture , welcome you visit our factory.


2,Q: Do you provide free samples ?

A:We do provide free samples under the condition that you assume the express shipping cost 


3,Q: How to place order ?

A: Please tell us the service you need, OEM or ODM, and the quantity , then we will make the PI for you. 


4,Q: How did you test the product before they are packed?

A :We have the strict QC procedure , each product will be tested by three times with professional machine before packing. 


5,Q:What's the delivery time ?

A: Usually 15-20 days after receiving deposit .


6,Q:Where is the shipping port ?

A:We ship the products via Huangpu port, Guangzhou or any other ports depend on your needs.


7,Q: What about the payment terms ?

A: 30% TT advanced payment , balance need to pay before shipment.

 

 

Adhesive