Visbella Excellent Auto Dent Ding Removal Repair Kit

HS Code
3506990000
Production Capacity
500000
Reference Price
$ 6.36 - 7.43
Contact Us

Product Description

Product Description

Dent repair kit is used to remove small dents and dings from car door, coffer, roof, without damage to the car paint. It can be used after small collisions or hailing, all over the car body surface, except for borders and angles.  
Visbella Excellent Auto Dent Ding Removal Repair Kit Visbella Excellent Auto Dent Ding Removal Repair Kit

Benefits
Repair dent ding by yourself, save your cost
No damage to car paint





Product Attribute
Appearance: Clear solid strip
Odor: None
Density (g/cm3): 1±0.5
Softening   temperature(ºC) 65-135
Operate temperature (ºC) 130-180
Melting time (mins) ≥10
Surface cure time (mins) ≥10
Full cure time (mins) ≥3
HOW TO USE
1.   Insert g lue stick into g lue gun , p lug in the g lue gun and let it warm up for 10-15 minutes before use.
2.   Using c lean cloth to clean dent area , t hen apply heated glue from g lue gun to the cen t e r  of the glue. Select one of the p uller tab according to the dent to be treated, and stick it to the glue.
Attention: Puller tab must sm a ller than dent area and similar in shape. Keep the p uller tab hold firmly for 10 seconds. Do not push excessively the p uller tab against the d ent!
3.   Place p uller bridge stand over the p uller tab,   setting a djusters to desired length. Screw the k nob nut slowly,   and continue to rotate until dent is raised. Stop when dent returns to normal surface level of the car body.
4.   Unthread Knob nut and remove p uller bridge stand and p uller tab from treated surface.
Use the r elease agent in endowment to remove the dried glue from the surface. Then   use the p lastic scraper to peel off softened glue patch.
5.   If a too high glue spot has been created, use a r ubber hammer and lightly tap the Leveling pen against raised spot to remove. If the dent surface is big, repeat above step.
 
 
NOTE
1.   Do not use on vehicles previously re-painted or plastered.
2. If the operating ambient temperature is lower than 5ºC (41ºF), use hair dryer blow puller tab and dent area before repairing (not less than 1 minute). This helps to strengthen the bond strength.
3. If the operating ambient temperature is higher than 30ºC (86ºF), u se cold water spray on the dent area to cooling before repairing . This helps to strengthen the bond strength




STORAGE
Products shall be ideally stored in a cool, dry location in un-opened containers at a temperature between 5 to 2 5 degree , avoid sunlight.

Production Line
Visbella Excellent Auto Dent Ding Removal Repair Kit
 
Company Overview

Zhejiang Guoneng Technology Co., Ltd was establish from 1992. Over 20 years professional manufacture experience, we become one of the largest Manufacture on Adhesive in Huzhou City Zhejiang China.
 
Our company covers an area of 22,000 square meters, including 800 square meters of laboratory and we have over 200 employees. We specialize in the production and distribution of adhesive products,and they're well approved by SGS, Reach, RoHs, BSCI, ISO9001:2000 etc. OEM and ODM are both welcomed.
 
We'd like to cooperate with customers from all over the world based on mutual-benefit. We always put "Customers First" in our mind and commit ourselves to providing high quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.

Visbella Excellent Auto Dent Ding Removal Repair Kit
 

Certificates
 
After-Sales Service

Reply within 24 Hours

Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms 

that that you bought.

Global Insurance Service

Global insurance service guarantees the safety of iterms when installation and application.

Compensation Policy

Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.

Contact us, you will get more than what you see

 

Adhesive