QS Series Centrifugal Double Suction Horizontal Split Case Pump
Overview
Model QS Horizontal split case
Fire pump
is a single-stage double-suction horizontal split centrifugal pump and used to transport pure water and the liquid of both physical and chemical nature similar to those of water, the maximum temperature of which must not be over 80ºC , suitable for water supply and drainage in factories, mines, cities and electric stations, waterlogged land drainage and irrigation of farming land and carious hydraulic projects.
Application
Aerospace Oil & Gas
Building industry Power Station
Chemical Petro-Chemical
General Industry Pharmaceutical
Marine Pulp & Paper
Mining & Aggregate Water & Waste water
Industry
|
Plumbing Applications
|
General water supply
|
Circulation of HVAC building systems, water booster service, boiler feed, general circulation service and more.
|
Agriculture / Food / Beverage
|
Irrigation, water supply, food processing beverage processing, fertilizers.
|
Manufacturing
|
Pulp and paper fans, plastic & rubber, metal & steel, pharmaceutical, paper mills, air wash, marine ballast service.
|
Fire
|
Fire pumps, fire protection, flood control.
|
Utilities : Water / Wastewater
|
Power Generation stations, dewatering, desalination, energy recovery turbines
|
Chemical / Mining
|
Chemical plants, refineries, petroleum distribution, coal sites, ethylene glycol pumping.
|
Advantages
20 years in producing
Independent Design
advanced technology from Australia, Canada, America
Specialized Test Equipment
Anti-rust treatment casting
Supply reasonable suggestion for choosing pumps
OEM available
Pump Structure
1.Casing
The volute casing is split on the horizontal centerline with the suction and discharge nozzle cast integral with the pump casing. The upper casing is accurately located on the lower half by the use of dowel pins. The upper casing can be removed to inspect the interior of the pump without disturbing the pipe connections or pump alignment. The suction and discharge flanges contain tapped holes for vacuum and pressure gauge. At the bottom of the flanges, there are tapped plugs for water drainage.
|
2. Impeller
The impeller is static-balance calibrated, fixed with the muff and the muff nuts in both sides and its axial position can be adjusted via the nuts and axial force gets balanced by means of the symmetrical arrangement of its blades, there may be residual axial force which is borne by the bearing at the axle end.
|
3. Shaft
The pump shaft is supported by two single-column centripetal ball bearings, which are mounted inside of the bearing body on both ends of the pump and lubricated with grease. The dual-suction seal ring is used to reduce the leak at the impeller
|
4. Seal Type
There is gland seal type and mechanical seal type.
|
Direction of Rotation
The Horizontal large volume double suction axially spilt casing centrifugal pump moves CW viewing from the clutch to it. The pump moving CCW can also be produced.
Materials
Irrigation pump general material is cast iron, main include pump casing, pump cover, impeller, seal ring and shaft sleeve, shaft is carbon steel. We could also produce as your requirements, such as nodular cast iron, cast steel, bronze and stainless steel etc.
Pump performance:
Model
QS
|
Flow rate
(m3/h)
|
Head
(m)
|
Speed
(rpm)
|
Power
(KW)
|
QS150
|
110~220
|
35~84
|
2900
|
30~55
|
QS200
|
160~351
|
31~100
|
2900
|
37~110
|
QS250
|
324~612
|
8.6~71
|
1450
|
22~132
|
QS300
|
504~972
|
8~98
|
1450
|
30~300
|
QS350
|
745~1663
|
10~140
|
1450
|
55~680
|
QS400
|
900~1620
|
32~98
|
980~1480
|
155~500
|
QS500
|
1150~2450
|
10.6~108
|
740~970
|
110~800
|
QS600
|
2304~4000
|
13~80
|
730~970
|
185~900
|
QS700
|
2111~4896
|
39.5~99.5
|
740~980
|
560~1250
|
QS800
|
3960~7200
|
23.5~84
|
600~740
|
450~1600
|
QS1000
|
6000~9900
|
32~52
|
600~990
|
1250
|
QS1200
|
5832~14400
|
6~95.7
|
500~745
|
710~3450
|
There only a part of the mechanical power of the centrifugal pump getting from the driver equipment, convert to the centrifugal power and then delivered to the liquid power. The another part was loss. The reasons are below:
1. Hydraulic loss: Created for the liquid impact, vortex and friction in the pump. The impact and vortex hydraulic loss is because of the the liquid change the flow direction. Besides, when the liquid flow, it will have friction when meet the pump passageway.This kind of loss depend on the length, volume, shape, and surface roughness of the passageway and the liquid flow speed and other character.
2. Volume loss: It resulted for the powered liquid will channeling are leakage. The general pump volume efficiency is 0.93~0.98%. Improve the seal ring and shaft seal construction, can reduce the volume loss and increase the volume efficiency.
3. Mechanical loss: It is caused by the friction of liquid and impeller plate surface, also named dick friction loss of impeller, and the pump shaft friction when rotated in the packing, bearing, balancing parts and other mechanical parts.
>>>Company Introduction
Shijiazhuang An Pump Machinery Co., Ltd is over 30 years experienced as a pump manufacturer (established in 1986) in mining and mineral, power plant, dredging and dredge, hydraulic, irrigation, pulp transfer, chemical, construction, seawater, and oil & gas transfer, etc.; An Pump Machinery is the pump factory has its own pump selection & design, research, and development team to assure provide you efficient, energy saving slurry pump, water pump, diesel water pump, chemical pump and irrigation pump in selection & design, use, and maintenance program.
An Pump Machinery is the pump factory approved by ISO9001, ISO14001, and OHSAS18001. We also have the certificate of CE. Our factory is over 50,000 square meters with a professional engineers over 20. The Max casting parts weight we could do one time is 7 tons. And we have the capacity to produce 600 tons per month with the heat treatment furnace dimension of 6mx5.5mx2.5m. The Max parts we could machine is 6.4 meters and we have the capacity to assemble the pump over 1800mm and our crane's capacity is 30 tons.
An Pump Machinery's products include slurry pumps, sewage pumps, water pumps, acid resistant or chemical pumps, irrigation pumps, fire pumps, and other products exported to over 90 countries all over the world. The application covers many fields, such as mining and mineral processing, dredger, tailings transportation, mining, steel, desulfurization pump, boiler feed water, construction, irrigation, water conservancy facilities, sewage treatment, drainage, and water supply.
In the era of rapid development of science and technology, An Pump Machinery team takes the entrepreneurial spirit of "excellence and constant product quality, a brand known worldwide and Credit-based", business purpose "the achievements of creating brand enterprise and industry pioneer", to help you out and provide quality & cheap innovative products!
>>>FAQ
(1). Q: Are you a trading company or manufacturer?
A: An Pump Machinery Co., Ltd is a real large professional manufacturer for more than 32 years, in China, producing with our own factory.
(2). Q: What are your factory workshops?
A: My factory produce includes casting, mechanical process, lathe process, heat treatment, assembly, test, etc.
Warmly welcome to visit & test my factory any time.
(3). Q: How about your QI series centrifugal end suction pump price?
A: We are sure our price is factory price, and insist on high quality for our long-term cooperation.
(4). Q: What is your QI series end suction pump material?
A: For the QI end suction pump, we could produce cast iron, cast steel, stainless steel, bronze, and material high CrMoNi alloy.
And we could also produce as your requirements.
(5). Q: What kind of liquid can your QI series centrifugal end suction pump transfer?
A: Liquid range: water, chemical liquid, hot water, sewage, etc.
(6). Q: How does your factory do regarding quality control?
A: Quality is a priority. we always attach great importance to quality control from the very beginning to the very end.
Our factory has 15~30 QC.
(7). Q: Is it easy for customers to change the parts by themselves?
A: yes, the structure is simple, customers can change it very easily. We will also supply you with maintenance tools for free.
(8). Q: How about your gravel pump warranty?
A: 1-year warranty for complete set pump, 6-8 months for wet parts, it depends on other pump working condition details.
(9). Q: How to do if the pump or parts have operation problems within your warranty?
A: Tell me details timely, and show me pictures, we will send you the pump solution at once without any hesitation.
(10). Q: Can you install the electric motor or diesel engine with the pump for us?
A: yes, we can, it's no problem, we are experienced in this.
(11): Q: We don't know which pump model we need, can you help us?
A: yes, please tell me your detailed requirements, including liquid, flow rate, head, etc
our engineers' team will calculate & select the most suitable pump model for you, and offer a pump solution for you.
(12). Q: How long can you reply to us if we send an inquiry?
A: Generally within 2 hours, we will send you an official quotation sheet, with price, technology data, performance curve, dimension, etc.
(13). Q: What are your advantages, and why should I choose you?
A: Higher Quality, our parts have a 30% longer life than the originals
Short Delivery Time, for normal parts, we have stock in our warehouse
Competitive Price, we can help you cut down the cost by 30% or more
Best Services, we have a technical department, a quality control department, and a professional sales team, we will offer professional service for you any time.
Dear Valuable Client,
Good day!
This is Yvonne from An Pump Machinery Co., Ltd, really glad to contact with you.
Our factory An Pump is a professional centrifugal pump manufacturer with nearly 40 years experience.
We can supply different slurry pumps and water pumps. We also have professional technical team to support OEM.
Do you have any new requirements for pumps recently? If yes, welcome send us new inquires, we'll quote you our best price.
Yvonne Zhang
AN PUMP MACHINERY CO., LTD.
Tel:
82