Inorganic Water- Based Anti-Slagging Ceramic Coating for Thermal Power Plant

Model NO.
TS-01A2302
Material
Epoxy
Classification
Room Curing
Main Agent Composition
Epoxy Resin
Characteristic
Waterproof
Promoter Composition
Ceramic Particle
Composition
Organic Material
Color
Green
Package Available
5kg/Barrel, 20kg/Barrel
Shelf Life
1 Year
OEM Service
Yes
Sample to Test
Yes
Transport Package
20kg/Barrel
Specification
5kg/barrel, 20kg/barrel
Trademark
Customized
Origin
China
HS Code
3214109000
Production Capacity
30000tons/Month
Reference Price
$ 306.00 - 315.00
Contact Us

Product Description

TS-01A2302  High Temperature Anti-slagging Ceramic Coating for Boiler

TS-01A2302  is an inorganic water based ceramic coating technology incorporating an advanced proprietary blend of ceramic and metallic additives. The coating is designed to achieve maximum wear resistance characteristics for metallic surfaces subjected to severe high temperature erosion. This single component technology is 50% solids by weight containing zero VOCs.

Inorganic Water-Based Anti-Slagging Ceramic Coating for Thermal Power Plant

Product Description:

This is a single-component system. THIS PRODUCT CONTAINS HEAVY LOADING OF CERAMIC ADDITIVES. SETTLING IN THE PRODUCT IS COMMON. THE PRODUCT SHOULD BE MIXED FREQUENTLY DURING AP-
PLICATION. Mix contents for 2 to 3 minutes until a uniform colour and consistency is achieved and the product is well dispersed. To ensure complete mixing, scrape sides and bottom of container and continue mixing for an addi- tional 1 or 2 minutes. DO NOT HAND MIX. Begin application immediately - no induction time. Skinning of the product may occur if left open for a period of time.


Product Application:

1, boiler, pipe, water wall, heat exchanger, radiator;
2, electric furnace, induction furnace, electric heating body, rotary kiln, tank, box;
3.Small household appliances, kitchenware, etc.
4, chemical, metallurgical high temperature components.


Inorganic Water-Based Anti-Slagging Ceramic Coating for Thermal Power Plant

Technical Data:
 
Performance Property Result
Color   White or Green
Pencil Hardness      3-4H
X-cut Adhesion  X Rating 10
Pull off Adhesion Greater   than   10Mpa
Temperature Resistance Up to 1 35 0 o C
1 35 0ºC
 
Viscosity  by Using   T-4 Cup   Viscometer     20-30 seconds
Solids Content       50 %
Volatile Organic Compounds 0 grams/liter
0

 

How to Use:

1,Preparation before coating
Paint precipitation curing:
In the curing machine, the seal is rolled to the bottom of the barrel without precipitation or the seal is stirred evenly without precipitation, and then the filter is filtered with about 150 mesh, and the filter can be used for backup.
Base material cleaning: oil removal and rust removal, surface coarsening sandblasting, sandblasting SA2.5 grade or above, with 46 mesh emery (white corundum) sandblasting effect is the best.
Coating tools: clean and dry, don ' t  stained with water or other substances, otherwise it will affect the effectiveness of the coating or even scrap.

2,Coating method (the following coating method can be used as needed)
Brush coating: soft and hard medium brush evenly coated.
Spraying: ordinary spraying, it is recommended to spray 1 times, if the coating thickness is relatively thick, product can be sprayed several times, but the coating thickness should not exceed 150um, otherwise  it will  increase the risk of coating cracking.
Roller coating: uniform roller coating can be.

3,Coating tool treatment and coating treatment
Coating tool treatment: after cleaning with anhydrous ethanol, clean with clean water, dry with compressed air and store.

Coating treatment:
After coating is finished, let the coating dry naturally (25ºC temperature for about 30 minutes), and then bake for 30 minutes at 280ºC.If you want to strengthen the hardness and adhesion of the coating, it can be roasted at 1000ºC for 30 minutes to achieve the best coating performance, it can be completed.



Package: 5kg/barrel or 20kg/barrel

Coverage: 1kg product can cover 4 square meter area


Transport and storage:

Keep the epoxy coating in dry, cool and covered facility, shelf life is half year. Avoid inversion and collision in transportation. This product is not dangerous goods.


 

 

Adhesive