Product Description
The basic principle of the cyclone is to separate liquid-liquid, liquid-solid, liquid-gas and other two-phase or multi-phase mixtures with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially entered into the male flow device at a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. Under the action of the spin-reduction field, the components with high density in the mixture move downward in the axial direction, move outward in the radial direction, and move down along the wall of the vessel when they reach the cone section, and are pushed out from the underflow port, thus forming a External vortex flow field: the groups with small density move toward the central axis, and form an upward-moving inner vortex at the center of the axis, which is then swept out from the overflow port, thus achieving the purpose of two-phase separation.
Small diameter cyclone for non-metallic mines
Novel structure, small diameter and small cone angle are beneficial to improve classification efficiency and classification accuracy.
Reasonable flow channel design, reasonable material combination selection, high pressure resistance, wear resistance, no pollution to the processed materials.
According to the change of separation particle size and processing capacity, reasonable design of the feed distributor and its pipeline is conducive to the consistent working state of each cyclone, so as to obtain a product with a narrow particle size distribution.
| Specification | diameter(mm) | Feed pressure(MPa) | Processing power(m³/h) | separation granularity(μm) |
| FX710 | 710 | 0.04-0.15 | 350-500 | 74-250 |
| FX660 | 660 | 0.04-0.15 | 250-360 | 74-250 |
| FX610 | 610 | 0.04-0.15 | 200-300 | 74-200 |
| FX500 | 500 | 0.04-0.2 | 140-240 | 74-200 |
| FX400 | 400 | 0.06-0.2 | 100-170 | 74-150 |
| FX350 | 350 | 0.06-0.2 | 70-150 | 50-150 |
| FX300 | 300 | 0.06-0.2 | 45-90 | 50-150 |
| FX250 | 250 | 0.06-0.3 | 40-80 | 40-100 |
| FX200 | 200 | 0.06-0.3 | 25-40 | 40-100 |
| FX150 | 150 | 0.08-0.3 | 15-30 | 20-74 |
| FX100 | 100 | 0.1-0.3 | 8-15 | 20-50 |
| FX75 | 75 | 0.1-0.4 | 5-8 | 10-40 |
3.Concentrated tailings concentration and dewatering
The combination of cyclone, concentrator and filter can efficiently complete the concentration and dehydration process. After the concentration and dehydration of the cyclone, the increase of the underflow concentration creates good conditions for filtration, which can greatly increase the filter capacity, and the reduction of the overflow concentration can effectively reduce the load of the concentrator, and can obtain higher underflow concentration and miscarriage rate.
In order to meet the production needs of customers, our company stocks a large number of various types of cyclone accessories, and can be customized production, supporting the products of major cyclone manufacturers at home and abroad (processing according to drawings).
Introduction of microcrystalline wear-resistant ceramic linings and linings
1. The microcrystalline alumina wear-resistant lining and lining are special wear-resistant ceramics formed by dry pressing and calcined at 1500-1700 ºC. Its Rockwell hardness is HRA80-90, which is only as hard as diamond;
2 The product has the characteristics of special wear resistance, impact resistance and convenient construction. Its theoretical wear resistance is equivalent to 260 times that of manganese steel and 170 times that of chrome steel. According to the actual application calculation, it can effectively extend the service life of the easily worn parts of the equipment by more than 10 times;
3 Application areas: It is mainly used on the inner and outer surfaces of material conveying pipelines and related wear-resistant equipment in coal washing, iron and steel plants, thermal power, chemical environmental protection, cement and other industries.
Microcrystalline wear-resistant ceramic lining, lining technical parameters
| Model |
Specifications (liner/porcelain)
|
| Alumina content | ≥95% |
| Density |
≥3.6 g/cm3
|
| Rockwell hardness | ≥85 HRA |
| Compressive strength | ≥850 MPa |
| Fracture toughness KIC |
≥4.8MPa m1/2
|
| Bending strength | ≥290MPa |
| Wear resistance |
≤0.0002g (p=76N n=800 rpm t=30 minutes)
|
| Ceramic sheet thickness |
1.5-25mm
|
Shanxi Huazhan Wear-resistant Material Technology Co., Ltd. is located in Gudan Industrial Park, Taiyuan City, Shanxi Province. Covering an area of 25,000 square meters, there are more than 30 engineers and technicians. In the past 20 years, we have been committed to the customization, production and service of wear-resistant and heat-resistant steel products, specializing in providing solutions for wear-resistant and heat-resistant products in power, metallurgy, mining, steel mills, petrochemical, new energy and other industries. A major breakthrough has been made in core technologies such as Wen: the introduction of advanced production technology, a monthly production of 300 tons of wear-resistant pipes, and advanced testing equipment. Our products involve more than 110 varieties in 12 categories and are currently the largest manufacturer of wear-resistant pipe fittings in China.
The company has an independent R&D and design team, 70% of the front-line employees have 10 years of casting experience, the products have passed the Is09001 quality system certification, and have a number of invention patents. The company has always pursued the "quality first, reputation first" business policy, strict quality management, and formed a strict quality restraint mechanism and a reliable quality assurance operation system. Because of reliable product quality, honest business philosophy, and scientific and technological effects, it has won the trust of users, and the scale of the enterprise is developing rapidly. project.
1. What is your mode of transportation?
Answer: Shipping, shipping
2. Why is your price higher than others?
Answer: Because the quality of the products must be guaranteed, the raw materials we use are all of high quality and strictly controlled. We cannot achieve the lowest price, but we will ensure that the quality is passed. So there will be differences in prices. The quality of raw materials differs greatly in price.
3. Can it be made in strict accordance with the caliber, specification and length provided by me?
Answer: General conventional products are implemented according to standard specifications, and non-conventional products can be customized.
4. I have a large demand, can I offer a discount?
Answer: Yes, depending on your specific needs, large quantities can be discounted.