Gold Tailings Refining Equipment 6S Gravity Shaking Table
1. Describtion
Shaking table
for sale is one of the main equipments of gravity concentration. Gravity Concentration Equipment is not only widely applied on separating tungsten, the tin, the tantalum niobium and other rare metals and the noble metal ore. Also widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc. The shaker effective recycling granularity scope is 2-0.037 millimeters.
Features:
1) High recovery ratio;
2) High concentration ratio;
3) Easy installation;
4) Simple operation;
5) Deck constructed of fiber glass;
6) Seven different decks to choose;
7) Long working life;
8) Adjustable stroke length and speed.
2. Working Principle
The working principle of shaking table for sale is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.
As per different particle size of raw ore, there are three distinct deck design available. The course ore deck is Designed for recovering particle size from 0.5mm to 2mm; The fine sand deck is designed for recovering fine particle From 0.15mm to 0.5mm; The slime deck is designed for recovering super extremely fine particle in the range of 0.074mm to 0.15mm.
A
dvantages:
1). Made by 6s firber glass material;
2). Steel structure support, easy to install and move to other place;
3). High recovery ratio, as usual more than 90% recovery ratio.
3.
Application
It is a mine separation device for fine minerals working by gravity.
It is widely applied on separating Gold, , Manganese, Chrome, Copper, Iron, Titanium, Zircon, Tungsten, Tin,Tantalum, Barium, Lead, Zinc, Mercury, , Aluminum ,and rare metals and the noble metal ore,also applied on sorting coal etc.
4.Technical Data
Model
|
6s-7.6
|
6s-4.08
|
6s-1.95
|
6s-0.5
|
Deck type
|
Coarse ore deck
|
Fine sand deck
|
Slime deck
|
|
|
|
Benefication Area(m2)
|
7.6
|
7.6
|
7.6
|
4.08
|
1.95
|
0.5
|
Deck size
|
Length(mm)
|
4450
|
4450
|
4450
|
3000
|
2100
|
1100
|
Transmission end width (mm)
|
1855
|
1855
|
1855
|
1320
|
1050
|
500
|
Concentrate end width (mm)
|
1546
|
1546
|
1546
|
110
|
850
|
430
|
Maximum feeding size(mm)
|
2
|
0.5
|
0.15
|
Sand -2 Slime-0.1
|
Sand -2 Slime-0.074
|
Sand -2 Slime-0.074
|
Feeding amount
|
0.8-1.5ton/h
|
0.8-1.5ton/h
|
0.8-1.5ton/h
|
0.4-1.5t/h
|
0.3-0.8t/h
|
0.05-0.2t/h
|
Feeding density(%)
|
25-30
|
20-25
|
15-25
|
10-30
|
Stroke(mm)
|
16-22
|
11-16
|
8-16
|
6-30
|
12-28
|
9-17
|
Frequency(F)
|
45-220
|
53-250
|
60-280
|
210-320
|
250-450
|
280-460
|
Water added
|
1-3t/h
|
1-3t/h
|
1-3t/h
|
0.4-2t/h
|
0.2-1t/h
|
0.1-0.5t/h
|
Transverse slope of deck
|
2°30-4°30
|
1°30-3°30
|
1°-2°
|
0-10°
|
0-8°
|
0-10°
|
Longitudinal slope of deck
|
1.4
|
0.92
|
---
|
---
|
---
|
---
|
Cross-section shape of deck
|
rectangular
|
saw-tooth
|
triangle
|
---
|
---
|
---
|
Motor power(kw)
|
1.1
|
0.55
|
Transmission mechanism
|
Eccentric linkage
|
Technical Data of Small /Lab Shaking Table
Model
|
LY-4.08 m 2
|
LY-1.95 m 2
|
LY-0.5 m 2
|
Bed Size (mm)
|
3000x1620x1100
|
2100x1050x850
|
1100x600x430
|
Stroke (mm)
|
6-30
|
12-28
|
9-17
|
Chong times (times / min)
|
210-320
|
250-450
|
280-460
|
Horizontal gradient
|
0-10
|
0-8
|
0-10
|
To the ore particle size (mm)
|
Ore bed
|
"2
|
"2
|
"2
|
Sludge bed
|
"0.074
|
"0.074
|
"0.074
|
To mine the concentration of
|
10-30
|
10-30
|
10-30
|
Feeding Amount
(t/h)
|
Ore
|
0.7-1.5
|
0.4-0.8
|
0.1-0.2
|
Slime
|
0.4-1
|
0.3-0.5
|
0.05-0.1
|
Water consumption (t / h)
|
0.3-1.5
|
0.2-1
|
0.1-0.5
|
Motor
|
Model
|
Y100L-4
|
Y90L-4
|
Y90L-4
|
Power (kw)
|
1.1
|
1.1
|
1.1
|
Speed
|
1400
|
1400
|
1400
|
Size (mm)
|
4070x1650x800
|
3040x1050x780
|
1530x600x670
|
Belt
|
A-1033
|
B-2007
|
A-1245
|
Shaking Table Weight (kg)
|
270
|
180
|
150
|
Here Are All The Types Of Small Lab Minging Separation Equipment We processing
1). Laboratory Jaw Crusher:
It is applicable to medium and fine crushed materiails for the purposes of laboratory and production and primarily provided as environmental protection equipment for coal, electric power, mine, geology, chemical, metallurgy, building material and other industries. The product is produced by the only erterprise designated by the former minis of Geology and Mineral Resources, in compliance with the Industrial standards.
2). Laboratory Ball Mill:
XMQ Series Cone Ball Mill is a lab. Grinding equipment for wet fine grinding of ore (150 × 50 Cone Ball Mill also can be used for dry grinding). It is applied in labs for processing and fine grinding of artificial placer materials and ores in metallurgical, building material, chemical, light, coal, water conservancy, electric power, agricultural and geological industries.
3). Laboratory Flotation:
XFD Series Single Flotation Cell is provided for flotation of minor ore samples in labs of geological, metallurgical, chemical and other industries. The product is produced by the only enterprise designated by the former Ministry of Geology and Mineral Mineral Resources, in compliance with the Industrial standards
XFD second-generation new product has a variable frequency technology, digital display, adjust the precise, reliable operation and so on.
XFD third-generation new product has a variable frequency technology, digital display, adjust the precise, reliable operation characteristics, and the other heat pipes, temperature control device, at any time control, display tank mine fluid temperature, plus automatic adjustment of fill with water, automatic drug delivery devices
4). Laboratory Magnetic Separator:
XCQS Wet High Intensity Magnetic Separation Machines for metal mineral processing laboratory, mining engineering experiment, the middle experimental plant, which uses fine-grained wet method magnetic ore separator, only a small amount of sample can be tested technical indicators of mineral iron content. Separator small size, easy to operate. The device is not suitable for beneficiation test with a corrosive liquid. This product is the only designated former Ministry of Geology and Mineral production, the implementation of industry standards.
5). Laboratory Shaking Table:
It is not only widely applied on separating Gold, Tungsten, Tin, Manganese, Iron, Titanium, Zircon, Tantalum, Barium, Chrome, Lead, Zinc, Mercury, Copper, Aluminum, and other rare metals and the noble metal ore, also applied on sorting coal.
It can carry out ore concentration operation independently and also can operate in conjunction with jig, spiral separator, centrifugal separator and other equipment.
The performance is also the same as the ordinary shaking table.
6). Electrostatic Separator:
It is an dry separating equipment in the high voltage electric field.
High voltage electricity separator is an dry separating equipment in the high voltage electric field, which eliminate the mineral according to the differences of materials electricity nature.
The selection of the Non-ferrous metal and black metal, such as iron ore, zircon, primary limonite, beach placer, manganese ore, titanium, tantalum, niobium, tin, monazite, and primary retiles.
The separation of impurity mineral which associated with feldspar and quartz.
5.Packing&Delivery
6.About Us
Ganzhou Gelin Mining Machinery Company Limited
is an expert manufacturing mining machines in China. Our company is located in the Industrial Zone of Shicheng County, Jiangxi Province.
Our distinctive products include Shaking table, Jig, Spiral separator, Gold concentrator, Ball mill, Jaw crusher, flotation, magnetic separator, Feeder, Classifier, ore washing machine and lab equipment etc. Our machines are popular in separating gold, copper, manganese, chrome, tungsten, tin, nickel, iron, titanium, lead, zinc, tantalum and some non-ferrous metals like quart, zircon, barite, etc.
Our products are sold to more than 28 provinces/cities in China and are exported to Russia, Africa, India, the Middle East, the Philippines, Mongolia, Sudan, Kazakhstan, Brazil, America, Canada and Australia. We have won high reputations from all of our clients for our machines and services.
Besides the above mentioned products, we can also design and manufacture many kinds of special mining machines and automatic processing lines according to the requests of customers. If you are in need of detailed information, please inform us. We will provide you with total solutions according to your specific requirements in time.
7.GELIN Services
--- PRE-SALE SERVICE ---
1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
--- AFTER-SALE SERVICE ---
1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term
--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
8.Certificate
9
.
Customer Visiting
10.FAQ
Q:
How
big is your factory?
A: I
n tolal 6 work shops ,17,000m²
, office 2500
m²
,110 workers.
Q: W
hat Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?
Q:
Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?
A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suita
ble solution and equipments selection. etc.
Q:
How long is the warrenty of your equipments? Does your company supply the spare parts?
A
:
The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
Q:
If i need the complete mineral processing line. is Gelin able to help us build it?
A:
Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Welcome you visit our factory in your free time!