Deep Groove   Ball Bearing  

Manufacturers:   Radial ball bearings   are able to accommodate low to heavy radial loads and low to moderate thrust loads in either direction.   Radial Deep Groove Ball Bearings   are available with metal shields (ZZ) or rubber seals (2RS). Several tolerance grades (Abec 1-9), internal clearance (C2 to C4) and cage designs are available to best suit the running precision and speed of the application.

Common Options of Radial   Deep Groove Ball Bearings :

• ZZ-- Two Metal Shields
• 2RS-- Two Rubber Seals
• NR-- Snap Ring
• M-- Brass Cage
• C0-- Normal Internal Clearance
• C3-- Greater than normal

Single row   deep groove ball bearings   are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable   deep groove ball bearings   to accommodate axial loads in both directions, in addition to radial loads.

Single row   deep groove ball bearings   are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of   deep groove ball bearings   are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the   bearing   at high speeds.

Bearing   Data - General
RSH or RS = Sheet steel reinforced contact seal of acrylonitrile-butadiene rubber (NBR) on one side of the   bearing
2RSH or 2RS = RSH or RS contact seal on both sides of the   bearing

RSL = Sheet steel reinforced low-friction contact seal of acrylonitrile-butadiene rubber (NBR) on one side of the   bearing
2RSL = RSL low friction contact seal on both sides of the   bearing

Z = Shield of pressed sheet steel on one side of the   bearing
2Z or ZZ = Z-Shield on both sides of the   bearing

About this item

• Size: 6200-2RS (Inner Dia.=10mm, Outer Dia.=30mm, Thickness=9mm)
• Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
• Made from Carbon Steel, durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
• Pre-Lubricated, Easy to maintain