DG202 Rehabilitation Nursing Center Foldable Electric Steel Stand Up Transfer Patient Lift with Sling
Description:
1. Small footprint, combined with lighter weight steel construction, provides easy manoeuvrability.
2. lower base height maximises stability and fits under most beds.
3. Daily transfers can be easily accomplished with the large push handles.
4. adjustable leg supports have soft padding to ensure legs remain comfortable at any height
5. For those who just need help getting up, simply remove the footrest. Wide, non-slip pedals provide a stable base for transfers.
6. 4-point lifting arm allows the use of a wide range of standing and transport sling sizes, types and brands. Multi-functional lifting bibs allow for quick toileting, standing assistance or fully supported seated transfers
7. emergency lowering device, which can be used to lower the actuator cantilever in the event of a power failure or malfunction during the use of the lift that prevents electric lowering
8. Emergency stop device, press the emergency stop device in case of emergency, the machine stops lifting when the power is off, turn the red button clockwise to restore power.
9. Ergonomic electric remote control for easy control of the lifting arm.
10. Twin 3″ front castors provide a low profile base for the lift, allowing access to smaller clearance spaces. Larger 4″ rear castors are easy to roll and provide better manoeuvrability.
11. Lift width can be adjusted via pedals.
12. Adjustable leg straps (optional) secure the legs to the knee pads for optimal positioning on the pedals
13. Removable battery compartment conveniently located on the mast with emergency shut-off button and charging indicator (with audible charging alarm)
14. used for bed transfer to a wheelchair or other seat, the caregiver can lift or move the patient in a single person operation, the effort-saving design also prevents back injuries caused by improper application of force by the caregiver
15. This model is more suitable for those who can stand and has a maximum load of 150kg.
Main Parameter
|
Model
|
DG202
|
Arm Length
|
820mm
|
Leg Length
|
1190mm
|
Overall Width
|
590mm
|
Base Open Width
|
860mm
|
Hook Height
|
1200-1880mm
|
Push Handle Height
|
1140mm
|
Base Clearance
|
115mm
|
Weight Capacity
|
150kg(200kgs optional)
|
Frame material:
|
Strong steel frame
|
Coating:
|
Powder coating
|
Front twin casters
|
3″
|
Rear break casters
|
4″ with brakes
|
Input voltage
|
220V50HZ
|
Motor:
|
24V
|
Company Information: