304 316L 316Ti 310S Seamless Stainless Steel Pipe
We produce seamless stainless steel pipe complying with specification A213, A269, A312, A511, stainless steel grades include 304, 304L, 316, 316L, 321, 347H, 310S, 904L, 2205, annealing pickling, bright annealing condition.

Seamless pipe is applied for General service, Curatorial Industry, Food and beverage Industry, Dorative and construct, Aerospace Industry, Chenmical and Petrochemical, Fluid transport, Water treatment, Boiler, heat exchanger, Oil and gas service, Mechanical and fabrication purpose.

Seamless Stainless Steel Pipe Specifications

Stainless Steel Grades

There are wide stainless steel material range for seamless pipes, containing Austenitic Stainless Steels, Ferritic Stainless Steels, Martensitic Stainless Steels and Duplex Stainless Steels, 304 / 304L and 316 / 316L grades are most used materials, other stainless steel grades are available.

TP316, TP316L Stainless Steel

TP304, TP304L Stainless Steel

Seamless Pipe Standard Specifications

Seamless Pipe Manufacturing Process

Seamless pipe is manufactured from steel round bar, the bar is heated and pierced to form a hollow billet, after removing oxide scale, billet is extruded into desired dimention using cold drawing and cold rolling methods, this technology can reduce outside diameter to smaller sizes, and control seamless pipe sizes and tolerances requirement, the inside of the tube can be controlled using a rod (known as rod drawing), a plug (known as plug drawing).

Billet

Billet is an extruded hollow tube from pilgered bar, it is actually semi finished tube, and it is needed inspection and pickling to ensure high quality.

Cold Rolling

Billet sizes are generally reduced to obtain thiner tube sizes, rolling process can achieve this purpose using compression.

Tube rolling is a very precise method of reducing very thin walled or smaller diameter tubes, usually it get a fine surface finish and accurate sizes.

Cold Drawing

Cold drawing is also cold working method to reduces the diameter by pulling the tube through a die, that device inner size is smaller than the tube, in order to pull the tube into the die, the diameter of tube is reduced to desired size to pass through.

Annealing

It is also named as heat treatment, this process soften material to make further processing, and improves the overall metallurgical microstructure of the tube.

Tube is heated to a controled temperate, usually 300 series stainless steel minimum annealing solution is 1040 C, annealing relieve stress and make material suitable redrawing.

Pickling

It is chemical method to clean the tube resulting from cold working or annealing process, generaal using sulphuric acid or nitric acid, putting tube into pickling tank and soaking a right time, not short and not long depending stainless steel grade.

Testing And Inspection

All the material should be tested before shipment as standard or special requirement, there are non-destructive and destrucative tests for option.

Non Destructive Testing

• PMI for material identity
• Visual inspectionDimensional inspection, tolerance
• Eddy Current testing
• Ultrasonic testing
• Hydrostatic pressure testing

Destructive Testing

• Yield Strength, Tensile Strength, Elongation
• Rockwell Hardness testing
• Grain size
• Flattening and flaring testing

Seamless Pipe Advantages

20% Higher Working Pressures

Compared to welded tube, seamless pipe has no longitudinal weld seam, seamless tube has 20% higher working pressures under the same material and size condition.

Heavy Walls

Seamlless pipe can acheive heavy wall pipe for high pressure applications.

Corossion Resistance

Seamless pipe is generally considered to be the most consistent material with the least impurities, because it has no welding seam, and reducing risk on corrosion attack

•  Stainless Steel 304 Pipes & Tubes
•  Stainless Steel 304L Pipes & Tubes
•  Stainless Steel 304H Pipes & Tubes
•  Stainless Steel 309 Pipes & Tubes
•  Stainless Steel 310 Pipes & Tubes
•  Stainless Steel 310S Pipes & Tubes
•  Stainless Steel 310H Pipes & Tubes
•  Stainless Steel 316 Pipes & Tubes
•  Stainless Steel 316L Pipes & Tubes
•  Stainless Steel 316H Pipes & Tubes
•  Stainless Steel 316Ti Pipes & Tubes
•  Stainless Steel 317L Pipes & Tubes
•  Stainless Steel 321 Pipes & Tubes
•  Stainless Steel 321H Pipes & Tubes
•  Stainless Steel 347 Pipes & Tubes
•  Stainless Steel 347H Pipes & Tubes
•  Stainless Steel 904L Pipes & Tubes
•  Stainless Steel SMO 254 Pipes & Tubes
 
Stainless Steel Seamless pipes
•  Stainless Steel 304 Seamless Pipes
•  Stainless Steel 304L Seamless Pipe
•  Stainless Steel 304H Seamless Pipe
•  Stainless Steel 309 Seamless Pipe
•  Stainless Steel 310 Seamless Pipe
•  Stainless Steel 310S Seamless Pipe
•  Stainless Steel 310H Seamless Pipe
•  Stainless Steel 316 Seamless Pipe
•  Stainless Steel 316L Seamless Pipe
•  Stainless Steel 316H Seamless Pipe
•  Stainless Steel 316Ti Seamless Pipe
•  Stainless Steel 317L Seamless Pipe
•  Stainless Steel 321 Seamless Pipe
•  Stainless Steel 321H Seamless Pipe
•  Stainless Steel 347 Seamless Pipe
•  Stainless Steel 347H Seamless Pipe
•  Stainless Steel 904L Seamless Pipe
•  Stainless Steel SMO 254 Seamless Pipes
Stainless Steel Seamless Tubes

•  Stainless Steel 304 Seamless Tubes
•  Stainless Steel 304L Seamless Tubes
•  Stainless Steel 304H Seamless Tubes
•  Stainless Steel 309 Seamless Tubes
•  Stainless Steel 310 Seamless Tubes
•  Stainless Steel 310S Seamless Tubes
•  Stainless Steel 310H Seamless Tubes
•  Stainless Steel 316 Seamless Tubes
•  Stainless Steel 316L Seamless Tubes
•  Stainless Steel 316H Seamless Tubes
•  Stainless Steel 316Ti Seamless Tubes
•  Stainless Steel 317L Seamless Tubes
•  Stainless Steel 321 Seamless Tubes
•  Stainless Steel 321H Seamless Tubes
•  Stainless Steel 347 Seamless Tubes
•  Stainless Steel 347H Seamless Tubes
•  Stainless Steel 904L Seamless Tubes
•  Stainless Steel SMO 254 Seamless Tubes

FAQ
Q. Are you a trading company or a manufacturer?
A: We are a manufacturer as you can see our workshop as above.

Q. What is your payment term?
A:Normally T/T 30% in advance, balance to be paid before delivery.

Q: What is your main market?
A:North America,Greenland,South America,Africa,Southeast Assia, Former Soviet Republics ,East Assia,and Europe.
Q: Can I place sample order to your factory?
A: Yes, Samples can be provided.

Q: What kind of trade terms can you do?
A:EX-WORKS,FOB,CFR,CIF,etc.

Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, it is accordijng to quantity.