Best Price High Quality Oil Filter Atlas Copco Replacement 1622365200 1622314200  1613610500 Screw Air Compressor Spare Parts Filter Element

Steps to replace oil filter:
1. Discharge the old waste lubricating oil. First discharge the waste lubricating oil in the screw air compressor oil cylinder, prepare a container for old lubricating oil, and then open the oil bolt to discharge the waste lubricating oil. When discharging lubricating oil, try to let the lubricating oil drop for a period of time, in order to ensure that the waste lubricating oil discharge is clean. (Lubricating oil will produce a lot of impurities when used. If the discharge is not clean when replaced, it is easy to block the oil circuit, resulting in poor oil supply and wear of structural parts)
2. Remove the oil filter element of the old screw air compressor. Move the old oil container under the filter and remove the old air compressor oil filter element. Be careful not to stain the inside of the machine with waste oil.
3. Install the new screw air compressor oil filter element. Check the oil outlet at the installation location and clean up the dirt and waste oil. Before installation, first set the sealing ring in the oil outlet position, and then slowly screw the new air compressor oil filter element, air compressor oil filter element do not screw too tight, under normal circumstances is to tighten by hand, and then use a wrench to screw 3/4 circle. Pay attention to installing the new air compressor oil filter element, do not use a wrench to twist too hard, otherwise it is easy to damage the sealing ring inside the filter element, resulting in poor sealing effect, can not filter effect!  
4. Fill the oil filter tank with new oil. Finally, pour the new oil into the oil tank and, if necessary, use a funnel to prevent pouring the oil on the outside of the engine. After filling, check the lower part of the engine again for leaks. If there is no leakage, check the oil gauge to see if the oil filter is filled with the top line. We recommend adding the top line. In the process of daily work, we should also check the dipstick regularly, and the oil should be timely supplemented when it is less than the line.

Air compressor regular replacement of three filter is in order to air compressor function normal and stable work, to meet the action requirements of gas components.
The role of the three filter and oil of the air compressor in the use of the air compressor is:
1, the air filter mainly filters the dust in the air (intake). If the air intake quality is not replaced for a long time, the oil filter, oil, and lubricating oil will be shortened. When the lubricating oil deteriorates, the body will be stuck. Moreover, if the air filter is blocked, the gas production of the air compressor will be reduced.
2. The oil filter mainly filters the impurities in the lubricating oil, which affects the life of the lubricating oil without replacement for a long time. If the oil filter is blocked, it will cause the oil circuit circulation is not good, and the machine will be high temperature and severe because of the lack of oil.
3, the main role of oil is to filter the oil in the oil mixture, to ensure that the compressed gas contains less oil. Make the compressed gas clean. When the oil is not distributed well, it will cause oil consumption. Oil plugging will cause the running current of the air compressor to be too large, and the machine will not be able to open in serious cases.
4. Lubricating oil plays four roles in the operation of air compressor. Lubrication, sealing, cooling, noise reduction.

Tips:
          If you don't find the part number you want in my online shop, please do not hesitate to contact us, Maybe I can check it for you. At the same time, we are a factory and can also customize unconventional filter elements for you at any time.

This is only a part of the part numbers,
many oil separator filters P/N are not listed,
in addition there are replacements filters for many other air compressor brands.
If you don't find the part number you want in my online shop,please do not hesitate to contact us,
Maybe I can check it for you.
At the same time,
we are a factory and can also customize unconventional filter elements for you at any time.
 

 

 

Packaging & Shipping

 

Certifications

 

Causes of failures

• Scavenge line too short

Scavenge line does not reach into internal bowl at the base of the separator.

Result: high oil carry over

• Scavenge line too long

End of scavenge line seats against base of bowl forming a seal. No oil, or an insufficient quantity is sucked up by the scavenge line. Compressor manufacturer's gap clearance is normally 1 to 2 mm alternatively, ensure tapered cut to end of scavenge line.

Result: high oil carry over

• Scavenge line blocked with dirt

Result: high oil carry over

• Scavenge line filter blocked

Some compressor models are fitted wit a small stainless steel mesh filter at some point in the scavenge line which is to be cleaned on a regular basis. If not cleaned the filter will block resulting in no scavenge action.

Result: high oil carry over.

• Scavenge line cracked / damaged

Allows atmospheric air to be ingested and insufficient or no oil removed from separator.

Result: high oil carry over.

 

 

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory, you are very welcome to visit our factory at your convenience.

Q: What products do you supply?
A: FT Filter is a professional manufacturer of air compressor filters with rich experience. Mainly supplying: Replacement and customized filters of air compressors; Air compressor parts; Line Filters; Vacuum Pump Filters; Hydraulic Filters, for many air compressor brands.

Q: Could I get some samples?
A: Yes, we can supply the sample, but the customers should bear logistics costs at first.

Q: How long is your delivery time?
A: If there is stock, the lead time is about 2 working days after we get the payment. The specific delivery time depends on models and the quantity of your order.

Q: What's Minimum Order Quantity of your air compressor part?
A: the MOQ is 1pc, need you pay for the delivery cost.

Q: Can I become an Agent / DISTRIBUTOR of Futai Filter?

A: Welcome! Please confirm the cooperation details and distributor qualification requirements with us, We have full advantages on quality and competitive price.