XJ Type Flotation Cell

[Introduction]  Self-suction mechanical agitation flotation machine.

[Capability]  0.05-7 m3/min

[Application]  Coarse separation, concentrating, sweeping and reverse flotation of metallic and non-metallic ores.

[Improvement]  There is a convex platform between the bottom of the groove and the bar, which acts as a guide and can accelerate the speed of slurry mixture rushing to the bottom of the groove. There is an arc-shaped flow stabilizing plate between the bottom of the groove and the rod, which can move around the groove body to make it uniformly distributed in the groove and move in a W-shaped trajectory.
 

Advantages

The slurryandgas have good trajectory and are especially suitable for flotation of mineral materials with high specific gravity, fast settling speed and coarse materials.
It has a special flow-stabilizing plate, which is composed of many arc blades of different lengths welded on the bottom liner of the groove. It can make the mixture of slurry and air evenly distribute all over the groove and prevent the slurry from turning in the groove.
Large air volume, strong stirring force and high bubble dispersion.
Mix slurry, gas and medicine evenly.
Flotation speed is fast.

Structure

A unit is composed of two flotation tanks. The first tank (with a slurry feeding tube) is an inhalation tank and the second tank is a DC tank. There is an intermediate chamber between the two tanks. The impeller is installed at the lower end of the main shaft, with a belt pulley at the upper end of the main shaft, which is driven by an electric motor to rotate. Air is inhaled through an intake suction tube. The slurry level of each flotation tank is regulated by the gate. The upper part of the impeller is provided with a cover plate and an air cylinder (also known as a vertical pipe). There are holes in the air cylinder for installing the slurry feeding pipe, the return pipe of medium ore or for slurry circulation. The size of the holes can be adjusted by a pull rod.

Technical Parameter