Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668)

Model NO.
Surtek 3668
Material
Polyurethane
Classification
Room Curing
Main Agent Composition
Polyurethane Prepolymer
Characteristic
High Viscosity, High Shear Strength, Fast Cure
Promoter Composition
Complexing Agent
Composition
Organic Material
Color
Black
Density
1.20±0.05 Kg/L
Cure Mechanism
Moisture-Curing
Non-Sag Properties
Good
Shore a Hardness
~ 60
Shear Strength
≥ 5 N/mm^2
Tensile Strength
≥ 8 N/mm^2
Elongation at Break
≥ 400%
Tear Strength
≥ 10 N/mm
Tack-Free Time (23 ºC , 50% Rh)
20~40 Min
Rate of Cure (23 ºC, 50% Rh)
≥ 3.5 mm/24hrs
Transport Package
310ml Cartridge, 400ml, 600ml Sausage
Specification
SGS
Trademark
Surtek
Origin
China
HS Code
3506100090
Production Capacity
72000000PCS/Year
Reference Price
$ 14.40 - 31.50
Contact Us

Product Description

Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668)
DESCRIPTION
Surtek 3668 is a one component, solvent free, high strength polyurethane adhesive sealant. It is non-sag, curing fast, of good initial strength. It does not contain solvent or PVC. And it has good vibration and weather resistance. The product is manufactured in accordance with ISO9001/ISO14001/TS16949.

ADVANTAGES
One component, easy to apply
No sagginess, easy to apply in vertical surface
Fast cure
Solvent free
Aging resistant

USES
Surtek 3668 is used for windshield direct glazing. It is widely used for structural bonding and installation for windscreen of car, bus, train, boat, ect.



Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668)

                


Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668)

APPLICATION
1. Use Comensflex Activator to make the substrate surface clean, dry, free of dust or grease.
2. Shake Comensflex Primer bottle to make the material even before using it. Use brush to apply the primer onto the cleaned surface for a thin layer.
3. Apply the sealant after the primer dried. Install the glass before the sealant tack free. The best working temperature is 20-30°C, humidity 50-70%
4. The sealant cures with moisture in the air. The lower the temperature and humidity is, the slower the curing is; and the higher the temperature and humidity is, the faster the curing is. Too high temperature and humidity may cause bubble in the cured sealant.
5. Avoid the adhesive sealant from alcohol, acid, ammonia chemicals. These chemicals will cause the adhesive sealant uncured.

TECHNIACAL DATA SHEET OF SURTEK 3668:
Appearance Uniform Paste
Color Black
Density 1.20 ± 0.05 kg/l
Tack-free time* 20~40 min
Rate of cure* ~3.5 mm per 24 hrs
Shore A hardness 60±5
Tensile strength ≥8 /mm 2
Elongation at break ≥400%
Tear strength ≥10 N/mm
Shear strength (without primer) ≥5 N/ mm 2
Service temperature (continuous)
Short - term (up to 48 hrs) 		-40°C to +90°C
130°C

PACKAGE
Cartridge: 310ml/cartridge, 20 cartridges/carton
Sausage: 400ml/sausages, 600ml/sausage, 20 sausages/carton
Drum: 200L/drum

STORAGE AND SHELF LIFE
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 9 months.
The recommended storage temperature is 5-25°C, humidity is <50% RH. It is strictly prohibited that the transportation or storage temperature is over 30°C or the humidity is over 80% RH. And high-temperature container transportation is prohibited as well.

Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668) Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668) Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668) Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668) Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668) Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668) Fast Curing High Perference Polyurethane Windscreen Sealant Adhesive (Surtek 3668)
FAQ

 

 

Adhesive