Fuel Tank Truck Introduction
Our tank trucks for transporting light fuel oil are divided into two categories: oil trucks and fuel trucks. They are mainly used for light fuel oil such as gasoline, diesel and kerosene.
Transport and refuel, if necessary, transport and fill other non-corrosive liquids. The tank trucks produced by our company have the advantages of reasonable design, fine manufacturing, excellent materials and excellent performance. The main technical indicators are in line with the requirements of GB18564 and QC/T653 standards.
Tanker Body
The tank body is a metal atmospheric pressure tank, which mainly has carbon steel tanks, stainless steel tanks and aluminum alloy tanks. The working pressure of the tank body is not more than 72KPa, and the working temperature of the tank body is -40 ~ +50°C.
The inside of the tank is equipped with a wave-proof plate , and some of the tanks are equipped with a longitudinal oil-blocking plate to reduce the impact of the oil in the tank on the head and the barrel.
There is a sedimentation tank and a sewage outlet at the bottom of the tank. The sewage outlet can be opened irregularly according to the situation, and the water and dirt stored in the sedimentation tank can be released. Integrated with the sedimentation tank, there is also an oil drain port through which the oil drain pipe can be connected to form a fuel tanker, or the oil pump inlet pipe can be connected to form a fuel truck.
The upper part of the tank body is provided with a safety frame , which is mainly for ensuring the safety of the user when operating above the tank body, and also for accumulating the oil spilled during the oil filling.
S INOTRUK HOWO 4 x2 FUEL TANK TRUCK SPECIFICATIONS |
||
Truck Model |
ZZ1167M4611W ( Left Hand Drive ) |
|
Truck Brand |
SINOTRUK-HO WO |
|
Dimension (LxWxH) (unloaded) mm |
8190 × 2550 × 365 0 |
|
Tank volume(m³) |
Tank volume: 12m³ , 1 separated tank, head 5mm, body 5mm,material Q235;
Subsea valve: 1 position;
2 units 4m 4" hose.
fire extinguishers. Vehicle spray wax. |
|
Approaching angle/ Departure angel (°) |
16 / 15 |
|
Overhang (front/rear) (mm) |
1 50 0/ 1890 |
|
Wheel base (mm) |
4600 |
|
Max . Driving speed (km/h) |
95 |
|
Front axle l oading capacity (kg) |
70 00 |
|
Rear axle loading capacity(kg) |
16000 |
|
Curb weight (kg) |
8990 |
|
Gross vehicle weight |
16000 |
|
Cab Model |
SINOTRUK HW76 Lengthen cab,single bunk,all steel forward control, 55o hydraulically tiltable to the front,2-arm windscreen wiper system with 3 speeds,
|
|
Engine Model |
Model |
WD615.87(EURO II),290hp,
6-cylinder in line, 4-stroke, water-cooled, turbo-charged & inter-cooled,
|
Rated Power(kw/rpm) |
2 13 /2 2 00 |
|
Make SINOTRUCK (CNHTC), Euro I I emission standard, Thermostat with 71 ºC opening begin, Rigid fan |
||
Clutch |
SINOTRUK Φ430 diaphragm-spring clutch,hydraulically operating with air assistance |
|
Transmission |
Model |
SINOTRUK HW1 3 710 transmission ,10 forward and 2 reverse |
Brake system
|
Service brake |
Dual circuit compressed air brake |
Parking Brake (emergency brake) |
Spring energy, compressed |
|
Steering system |
Model |
ZF8 19 8 Steering Gear Box ,hydraulic steering with power assistance. ( Left hand driving) |
Front axle |
SINOTRUK 7000kg Front Axle,new 7 -ton front axles of equipped with drum brakes. |
|
Rear axle |
SINOTRUK
16000kg
Double Reduction Drive Axle, Pressed axle housing, central single reduction with planetary wheel reduction and with differential locks
|
|
Wheels & Tire |
Rims: 9.0-22.5 10 hole-steel ;Tyres:12 R22.5 tubeless tyre with 1 Spare tire. |
|
Electrical system |
Electrics Operating voltage |
24V,negative grounded |
Starter |
24V,7.5 Kw |
|
Alternator |
3-phase,28V,1500 W |
|
Batteries |
2x12 V,165 Ah |
|
horn,headlamps,fog lights,brake lights,indicators and reverse light . |
||
Oil Tank |
Square type- 4 00L Aluminum alloy fuel tank |
|
Packing |
Nude Pack.The packing of the commodity shall be in accordance with the export standard packing of the manufacturer,be suitable
|
|
The manufacturer reserves the right of technical alteration /change for better improvement without prior notice |
FAQ
1. MOQ: 1 unit
2. Optional payment terms: T/T or L/C
T/T: 30% deposit by T/T, 70% balance should be paid before shippment.
L/C: 30% payment advance, 70% L/C at sight.
3. Parts of famous brand can be adopted by your requirement.
4. Delivery time: Within15 workdays after receiving 30% deposit of T/T
About Us
1 Factory price, more competitive than agent price.
2 Quality: With SINOTRUK group inspection system, a series inspections are well done before the exportation.
3 Warranty: One year or 100 000k which comes to the first for the engine, gear box, and axles.
4 After-sales: Professional after-sales team sovle your difficult or special questions within 3 working days or 5 working days, and all spare parts are available for your urgent use.
5 Transportation: Professional logistics team work with international shipping company for your truck shipment successfuly.
Our Customers