Strong Adhesion Silicone Rubber Sealant Glue for General Purpose

Model NO.
C-550
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
G.W.
340g
N.W.
280g
Cartridge Weight
60g
Packing Detail
24 PCS/CTN
Packing Size
30*20*24cm
Skin Dry
10-30 Mins
Complete Dry
4 Days
Max Strong Day
After 21 Day
Density
1.45
Transport Package
Carton
Specification
300ml
Trademark
CSJ
Origin
China
HS Code
3506100090
Production Capacity
50000000 CTN/ Year
Reference Price
$ 0.86 - 16.20
Contact Us

Product Description

High Grade Neutral Silicone Sealant For Aluminum Doors and Windows (C-550)

  Strong Adhesion Silicone Rubber Sealant Glue for General Purpose


 
Characteristics:
1. One component
2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble
3. Non - discoloring. 
4. Excellent adhesion to glass, metal and plastic etc
5. Excellent resistance to low and high temperature, little performance changes between - 4 0 ºC~150 ºC
6. Excellent resistance ultraviolet radiation
7. Odorless
 

Application:
For a wide range of Aluminum doors and windows, plastic steel doors and windows, stainless steel, glass, Aluminum sheet, ceramics, sky light, roof, most of building material. Can not use for coated glass.
  Strong Adhesion Silicone Rubber Sealant Glue for General Purpose

Limitations:
1. Cannot be used as structural sealant.
2. Not compatible with materials with grease or exudation.
3. The construction surface should be clean and dry.
4. Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5. Cannot be used on the substrate surface below 6ºC or above 40 ºC
 
Curing Time:
Track-free Time is between  15  to  20  minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.


Way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only
Strong Adhesion Silicone Rubber Sealant Glue for General Purpose  

Notices:
1.  For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
 
Color available:
White,   grey ,  black, others of special order
  Strong Adhesion Silicone Rubber Sealant Glue for General Purpose

Packaging
Cartridge: 300ml        24 cartridges/carton
Gross weight: 470g     Net weight: 410g    
 
Storage and transportation:
1. 12 months stored in a dry and ventilated place below 27 ºc  in original packaging.
2. non-dangerous, can be transported by train,   automobile,   ship.
3. Uncured product may irritate eyes. In case of eyes contact, rinse them immediately with water and seek medical aid.
4. Keep out of reach of children.


Testing Standard: GB/T 14683-2003  
TECHNICAL DATA SHEET
No Item The standard Test result
1 Appearance Have no grain, no agglomerations, no skinning, and no bubble. Pass the standard
2 Density (g/cm 3 ) ±0.1 1.438
3 Droop degree
mm 		Uprightness ≤3 0
Level No  damage No  damage
4 Skinning time ( h ) ≤3 0.33
5 Elastic recovery ratio  ( % ) ≥80 92
6 Extrusion ability ( ml/min )   ≥80 116
7 Tensile modulus
  ( Mpa ) 		23ºC ≤ 0.6 0.7
8 Cold-hot adhesive No  damage No  damage
9 Under water adhesive No  damage No  damage
10 UV radiation No  damage No  damage
11 Definite Elongation No  damage No  damage
 
Certificate
Strong Adhesion Silicone Rubber Sealant Glue for General Purpose


Automatic Mechanical:





FAQ:

1.Can u send sample to us ?
   Yes, the sample is free.
 
2.Can you give us private design ?
   Yes, we offer OEM service, can making your own brand.
   
3.What's your guarantee?
   10-15 years.
 
4.Can you provide us with your client information ?
    Yes, for checking our company reputation and sample collection.
 
5.How many days to produce one 20'container?
   5-10days.
 
6.Can we visit factory?
   Yes, warmly welcome to visit us at any time.
 
7.What are the documents we provide ?
   Packing list, commercial invoice, CO / FORM E / FORM A , BL making    according to your demand. 
 

 

Adhesive