AH series | L(R) ,M | HH | SP(R) | G | AF Series |
1.5/1B-AH(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G | 2QV-AF |
2/1.5B-AH(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 3QV-AF |
3/2C-AH(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF |
4/3C-AH(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G | 8SV-AF |
6/4D-AH(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G | |
6/4E-AH(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G | |
8/6E-AH(R) | 10/8 R-M | 6S-H | 14/12T-G | ||
8/6R-AH(R) | 10/8 E-M | 8/6S-H | 16/14 G-G | ||
10/8F-AH(R) | 8/6X-H | 16/14TU-GH | |||
10/8X-AH(R) | 6S-HP | 16/14H-GH | |||
12/10ST-AH(R) | 8/6S-HP | 18/16G-G | |||
14/12ST-AH(R) | 8/6X-HP | 18/16 TU-GH | |||
16/14TU-AH(R) | |||||
20/18G(TU)-AH(R) |
No. | Part Name | Basic Part No. |
1 | Ajusting Screw | 001 |
2 | Base | 003 |
3 | Bearing Housing | 004 |
4 | Bearing Assembly | 005 |
5 | Bearing | 009 |
6 | Clamp Washer | 011 |
7 | Clamp Bolt and Nut | 012 |
8 | Cover Plate | 013 |
9 | Cover Plate Bolt | 015 |
10 | Cover Plate Liner | 017/018 |
11 | Cover Plate Liner Stud | 023 |
12 | End Cover | 024 |
13 | End Cover Shim | 025 |
14 | Frame Plate Liner Insert Stud | 026 |
15 | End Cover Set Screw | 027 |
16 | Expeller | 028 |
17 | Expeller Ring | 029 |
18 | Frame Plate | 032 |
19 | Frame Plate Bolt | 034 |
20 | Frame Plate Liner | 036 |
21 | Frame Plate Liner Stud | 039 |
22 | Frame Plate Liner Insert Bolt | 040 |
23 | Frame Plate Liner Insert | 041 |
24 | Frame Plate Liner | 043 |
25 | Gland | 044 |
26 | Gland Bolt | 045 |
27 | Grease Retainer | 046 |
28 | Impeller | / |
29 | Intake Joint Ring | 060 |
30 | Labyrinth Locknut&Washer | 061 |
No. | Part Name | Basic Part No. |
31 | Labyrinth | 062 |
32 | Lantern Ring | 063 |
33 | Impeller O Ring | 064 |
34 | Neck Ring | 067 |
35 | Shaft Key | 070 |
36 | Shaft | 073 |
37 | Shaft Sleeve | 075/076 |
38 | Stuffing Box | 078 |
41 | Keeper Plate | 081 |
42 | Throatbush | 083 |
43 | Throatbush Cotter | 085 |
44 | Seal | 089/090 |
45 | Piston Ring | 108 |
46 | Shaft O Ring | 109 |
47 | Volute Liner | 110 |
48 | Packing Ring | 111 |
49 | Shaft Spacer | 117 |
50 | Lantern Restrictor | 118 |
51 | Expeller Ring Seal | 122 |
52 | Volute Cover Seal | 124 |
53 | Volute Frame Seal | 125 |
54 | Gland Clamp Bolt | 126 |
55 | Joint Ring Discharge | 132 |
56 | Grease Cup Adaptor | 138 |
No. |
China Code |
Parts Names |
Code |
U.S.A
Code |
Performance&Application |
Metal |
HT200 Grey Iron |
Casing,Frame, Bearing Housing, Stuffing Box |
G01 |
AWSNO.30 |
|
QT500-7 Ductile Iron |
Casing,Frame, Bearing Housing |
D21 |
AWS 80-55-06 |
|
|
KmTBCr26 High Chrome Alloy |
Impeller,Volute Liner, Trhoat Busing,Expeller, F.P.L Insert |
A05 |
ASTM 25%Cr Class III Type A |
Abrasion-resistant performance lower than A07 Fair corrosion-resistance.
High impact load abrasion condition.PH range from 5~12. |
|
|
Impeller,Volute Liner, Trhoat Busing,Expeller, F.P.L Insert |
A07 |
|
Best abrasion-resistant performance;Corrosion resistance performance is inferior than A05. High impact load abrasion condition. |
|
|
Impeller,Volute Liner, Trhoat Busing,Expeller, F.P.L Insert |
A33 |
|
Abrasion-resistant performance is 20% less than A05.Fair corrosion resistance performance. Oxide slurry with PH rate no less than 1,like phosphogypsum in phosphate fertilizer plant,nitric acid,sulphoacid and phosphoric acid etc. | |
|
Impeller,Volute Liner, Trhoat Busing,Expeller, F.P.L Insert |
A49 |
ASTM A532 Class III Type A |
Fair abrasion-resistant performance is 20% less than A05.Fair corrosion resistance performance in media with low PH rate.Especially for fuel gas,FGD devices for media of Ph≥4.
General suitable for lower acid condition. |
|
45 Carbon Steel |
Shaft,Casing Bolt |
45 |
ASTM 1045 |
Corrosion conditions with low PH rate,especially for fuel gas,FGD devices for media of Ph≥4. General suitable for lower acid condition. |
|
3Cr13 |
Shaft Sleeve, Spacer |
3Cr13 |
ASTM 420 |
|