High Quality CNC Laser Cutting Machinery for Aluminum Cutting

Laser Technology
Laser Control Fault Cutting
Laser Cutter Type
Fiber-Optic Laser
Rated Output Power
2000 W
Cutter Wavelength
1064 Nm
Y Axis Travel
2023mm
Z Axis Travel
100mm
Frequency
50Hz
X Axis Travel
4020mm
Maximum Empty Speed
60m/Min
Transport Package
Wooden Package
Specification
2000W
Trademark
EN-SOURCE
Origin
China, Zhejiang
HS Code
845610009
Production Capacity
500
Reference Price
$ 27,000.00 - 135,000.00
Contact Us

Product Description

High Quality CNC Laser Cutting Machinery for Aluminum Cutting


The company mainly produces three types of products, including CNC turret punch press (servo type, hydraulic type, mechanical type), laser cutting machine (YAG and optical fiber), flexible processing production line in sheet metal industry, with more than 30 products. The products are widely used in cold stamping processing industry, such as electric control cabinets, kitchen equipment, lamps, lid making, tank production lines, instruments, solar water heaters, battery iron plates, architectural decorative plates, auto parts, metal furniture, mufflers, screens, etc.

II.Laser Cutting Machine Photo:
High Quality CNC Laser Cutting Machinery for Aluminum Cutting
High Quality CNC Laser Cutting Machinery for Aluminum Cutting
High Quality CNC Laser Cutting Machinery for Aluminum Cutting

III.Laser Metal Cutting Machine Main Configuration
No. Name Origin and manufacturer name
1 Fiber laser cutting machine generator(2000W) Rui Ke
2 Special laser cutting head (auto focus) Shanghai Jiaqiang
3 Cuting machine bed (steel plate welding) Self-produced
4 Beam Integrated welding beam
5 Guide Taiwan HIWIN
6 Reducer France Motoly
7 Gear, rack Taiwan K.H
8 Servo motor and driver Japan Panasonic
10 Control cabinet Self-produced
11 Low-voltage electrical appliances Chint
12 Origin, limit switch Swiss Carole
13 Cable Flexible shielded cable
14 Transformer Shenzhen Xinbei Ocean
15 IPC Taiwan Advantech
16 Monitor United States Dell
17 CNC system (including control software, height controller) Shanghai company
18 Oil road Electric oil pump
19 Gas circuit (proportional valve) NNT
20 Chiller Han Li

IV.Main Technical Parameters of Fiber Laser Cutting Machine
No. Device model GX4020-2000W
1 Laser cutter type fiber-optic laser
2 Laser working medium optical fiber
3 CNC laser cutter wavelength 1064 nm
4 Rated output power  2000 W
5 Beam quality <0.373mrad
6 X axis travel 4020mm
7 Y axis travel 2023mm
8 Z axis travel 100mm
9 Effective cutting range 4000×2000mm
10 Workbench axial positioning accuracy ≤±0.05mm/m
11 Worktable repeat positioning accuracy ≤±0.02mm/m
12 Maximum empty speed 60m/min
13 Workbench maximum load 2000KG
14 Phase 3
15 Power supply rated voltage 380V
16 Frequency 50Hz
17 Total power protection level IP54

V.Cutting   P erformance Table:
Material Thickness(mm) Speed(m/min) Power (W) Auxiliary gas
Stainless steel 1 35 2000 air
2 10 2000 air
3 6.5 2000 air
4 4 2000 air
5 2.4 2000 air
6 1.6 2000 air
8 0.9 2000 air
1 30 2000 N2
2 9 2000 N2
3 6 2000 N2
4 3.2 2000 N2
5 2 2000 N2
6 1.2 2000 N2
8 0.6 2000 N2
Carbon steel 1 9 2000 O2
2 4.2 2000 O2
3 3.8 2000 O2
3 3 2000 O2
4 3.3 2000 O2
4 2.8 2000 O2
5 2.6 2000 O2
6 1.8 2000 O2
8 1.3 2000 O2
10 1.1 2000 O2
12 1 2000 O2
14 0.9 2000 O2
16 0.8 2000 O2
Brass 1 25 2000 N2
2 7.5 2000 N2
3 3.5 2000 N2
4 1.8 2000 N2
5 0.8 2000 N2
Aluminum 1 30 2000 N2
2 8 2000 N2
3 4 2000 N2
4 2.5 2000 N2
5 2 2000 N2
6 1 2000 N2
8 0.6 2000 N2
1 30 2000 Air
2 9 2000 Air
3 3.2 2000 Air
4 2 2000 Air
5 1.4 2000 Air
6 0.8 2000 Air
Copper 1 12 2000 O2
2 4 2000 O2
Galvanized sheet 1 25 2000 N2
2 9 2000 N2
3 4.5 2000 N2
Remarks: The above metal laser cutting machine data is for reference only, please refer to the site conditions in actual use; and must match the following requirements.
Focusing lens and protecting lens are very clean.
The purity of the cutting auxiliary gas must match: O2: 99.95%; N2: 99.99%.
The machine is properly maintained and the parameters are adjusted reasonably.
The sheet meets the laser cutting requirements (smooth surface; no rust, no paint, etc.).

VI.Laser   Cutting Machinery Services
1.Pre-sales services: it includes the buyer's engineering and technical personnel, user department, supply department to inquire about laser equipment, process experiment of sample parts, equipment selection, etc. This service is free of charge.

2.Installation and training: After the equipment is delivered to buyer factory, the supplier is responsible for the laser cutting machine installation, commissioning and delivery of the site on the demand side with the assistance of the demand side, and brings the necessary special tools and debugging tools. And the engineer will train operation and maintenance worker again.
The training content includes:
Laser safety protection common sense
The basic principle of laser and the structure of laser cutting machine
Operating skills of control systems
Equipment operation and precautions
Routine equipment maintenance, laser adjustment and spare parts replacement operation skills
The training time is about 5 days

3. Equipment acceptance: After the contract is signed, the supplier designs and manufactures the equipment strictly in accordance with the technical specifications of the contract. After the equipment is manufactured and manufactured, the demand side performs pre-acceptance on the equipment according to various technical indicators at the location of the supplier. After the equipment is installed and commissioned on the demand side, both parties conduct final acceptance of the equipment feasibility, stability and reliability according to the pre-acceptance standards.

4. After-sales service: The company provides a two-year warranty and lifetime maintenance on the products purchased by the buyer. During the warranty period, the equipment is faulty and the machine parts are damaged (except for human factors and force majeure factors), the supplier is responsible for free repairs, and the required replacements are provided by the buyer free of charge (except consumable parts). After the warranty period, only the actual maintenance cost will be charged for maintenance.

5. Packaging and transportation: The supplier meets the domestic railway or highway transportation packaging standards on the packaging. It is suitable for long-distance bus transportation or train transportation. It is moisture-proof, rust-proof, shock-proof and rough-proof loading and unloading, suitable for overall lifting. Each part of the equipment is packed according to relevant standards, and each packing box has a detailed packing list.

VII. The Finished Product Workshop:




 

 

Laser Cutting Machine