YXX Rechargeable 500 - 1000WAh Portable LIFEPO4 Battery Generator Solar Power Station

1. Key Feature
* Super Capacity:   Built-in 3.2V / 162000mAH LiFePO4 Battery Cell.
*Fast charging: uses QC18W fast charging for charging, which can be fully charged within 3-5 hours 
*Power display: LCD display, and the accuracy of power indication reaches +/- 1%
*AC Output:  110V or 220V +/- 10V, Pure Sine Wave
*USB Output: QC3.0/AFC/FCP/SCP/PE/SFCP 18W
*Type-C1 Output: PD 24W
*Type-C2: PD 100W
*Cigarette Lighter Output: 12V/10A
*DC 5521 Output: 12V/10A
*MPPT/DC 5521 Charging: 10 - 23V/5A (Max 100W)
*Protection Function: Over-charging Protection, Over-discharging Protection, Over-load Protection, Over-current Protection, Short-circuit Protection
*Multi-funtion: can charge various products such as mobile phone, tablet, camera, drone, car refrigerator, lamp, speaker
2. Input Charging Specification
2.1 Input Voltage Range
12V - 24V,  Support QC3.0 2.2 Max. Charge Input Current 2.3 Input Charging Efficiency
a. 12V Charger:  charging efficiency > 89%
b. 24V Charger:  charging efficiency > 87%
2.4 Battery Specifications 2.5 Charge Time:3 ~ 5 hours
2.6 Safety Charge Time
To avoid damage to the battery caused by prolonged charging, the Power Station will forcibly turn off the charging circuit after constant current charging exceeds 33 ± 1 hour or trickle charging exceeds 40 minutes. At this time, the Power Station will display the current battery level in real time
2.7 Charger Over-voltage Protection
When the charging voltage is ≥ 12.8V, the Power Station will turn off the charging circuit to protect the safety of the battery pack.
2.8 Charger Capacity Display
Battery capacity will display on LCD. At the same time, the white led light flashes when the battery level is below 90%, and the white light stop flashing when the battery level is above 90%
2.9 MPPT DC Input
The Power Bank can connect to PV solar module panel to charge the power station. Solar panel: 18V monocrystal silicon
3. Output Specification
a. AC110V or AC220V, pure sine wave
b. Type-C Output: 5V/3A, 9V/2A, 12V/1.5A
c. Lightning Output: 5V/2.4A, 9V/2.2A
d. USB Output: QC3.0/AFC/FCP/SCP/PE/SFCP 18W
3.1 Discharge Time 3.2 Output Voltage Ripple and Noise: Less than 200mV p-p
3.3 Discharging Convert Efficiency 4. Bidirectional Inverter Power Supply
The portable power station is built-in one bi-directional inverter power supply. Not only can it invert DC to output AC, it can also charge the battery by its AC port.
4.1 DC Input Specification 4.2 AC Output Specification 4.3 AC Input Specification 4.4 DC Output Specification
5. Protection Function
5.1 Battery Over-discharge Protection
a. First Discharge Protection
In the 5V/3.1A discharge output mode, when the battery voltage is less than 3.0 ± 0.1V, the LED power indicator light goes out, and the mobile power supply turns off the output, entering the battery over discharge protection.
b. Secondary Discharge Protection
When the battery is over-discharged, the software over discharge protection usually works first, turns off the output, and the Power Station enter a sleep state.
Only when the software over-discharge protection function fails or the power station malfunctions abnormally, and the lithium battery protection circuit detects that the battery voltage is lower than the over discharge voltage, the protection circuit turns off the MOSFET, thereby turning off the output.
5.2 Output Short Protection
When there is a short circuit in the output, the power station enters the protection state and turns off the output. 
5.3 Output Over-current Protection
When the output voltage is 5V and the current is greater than 3.1-4.1A, the power supply will immediately turn off the output. After the overcurrent condition is resolved, it is necessary to plug and unplug again to restore the output.
When the output voltage is 9V and the current is greater than 2.1-3.1A, the power supply jumps to 5V.
When the output voltage is 12V and the current is greater than 1.6-2.6A, the power supply jumps to 5V
5.4 Charge/discharge Over Temperature Protection
5.4.1 Charging state:
a. When the battery temperature is less than -3 ± 3 ºC, cannot charge the built-in battery;
b. When the battery temperature is less than 10 ± 4 ºC, the charging current of the built-in battery is 50% of the standard charging current; 
c. When the battery temperature is between 7 ºC and 45 ± 4 ºC, the charging current is the standard charging current;
d. When the battery temperature is between 45 ºC  and 55 ± 3 ºC, the charging current is 50% of the standard charging current; 
e. When the battery temperature is greater than 50 ± 4 ºC, cannot charge the built-in battery.
4.4.2 Discharge state:
a. When the battery temperature > 60 ± 3 ºC, cannot discharge; when the battery temperature <-13 ± 3 ºC, cannot discharge too.
6. Safety Design Specification
6.1 Safety Reference Stardard :
The fire resistance rating of the enclosure reaches the 94V-0 standard
7. Environment Requirement
7.1 Temperature
Working environment temperature: discharge -10 ºC~35 ºC, charging 0 ºC~35 ºC.
Storage environment temperature: -10 ºC~55 ºC
7.2 Humidity
Working environment humidity: 20-80%; Storage environment humidity: 10~90%
8. Reliability Testing
8.1 Enclosure Temperature Rise
a. Plastic and rubber shell: Under standard input voltage and output full load state, when the ambient temperature is 25 ± 1 ºC, the temperature rise of the power supply shell is less than 45K.
b. Metal shell: Under standard input voltage and output full load state, when the ambient temperature is 25 ± 1 ºC, the temperature rise of the power supply shell is less than 25K
8.2 Operation Life
The product can work for 2 years under normal circumstances
8.3 Battery Cell Life
Charging and discharging system works with 0.5C current for 400 cycles:
a. After 300 cycles, the capacity>80% of initial capacity
b. After 400 cycles, the capacity>60% of initial capacity
c. Thickness increase<10% of initial measurement
d. Internal resistance does not exceed standard internal resistance




Company Profile :
Shenzhen YXX-Tech  Technology Limited. is a energy storage product manufacturing company including R&D, production and sales, specializing in the production and development of various mobile power supplies and battery energy storage products, undertaking OEM and ODM orders, We have 9 years of experience in the field of electronic products, the company has advanced manufacturing equipment and accurate testing equipment, full computer monitoring intelligent aging equipment, has a complete and scientific quality management system. Strong technical experience, professional team operation, adhering to the customer-oriented, honest business philosophy, to survive by quality, to provide professional product production and service for our customers and friends; Its integrity, strength and product quality have been recognized by the industry, Welcome friends from all walks of life to visit, guide and negotiate business. We take honesty as the principle and sincerely hope to work with you to create a better
future!
FAQ :
Q1.   Are you manufacturer or Trade Company?

We are a manufacturer of energy storage products in Shenzhen.

Q2. What ' s  terms of payment ?
     
T/T, Western Union, LC at sight

Q3.   How do you offer samples?

We offer free samples in certain quantity and delivery within 5-7 working days.

Q4 .  How about  the order process   ?

a. Inquiry---provide us all clear requirements.
b. Quotation---official quotation form with all clear specifications.
c. Sample confirmation.
d. Payment terms--- TT 30% in advanced, 70% balance before shipment.
e. Printing file.
f. Production---mass production
g. Shipping--- by sea, air or courier.

Q5.   What is your delivery time?

Sample: 5-7 working days
Mass order:  35-45 working days after 30% deposit.

Q6 .   What is your MOQ ?

For this model, usually our MOQ is  50pcs.

Q7 .   Can your factory make the lights based on customers' design?

Yes, OEM and ODM service are available.