Multi-frequency RFID Reader with 125KHz and 13.56MHz combi frequency

Specification

 Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red        DC 12V

Black       GND

Green       D0

White        D1

Blue         LED 

Yellow       Beep 

Grey        WG34 ( if you need wiegand 34 output , kindly connect the grey cable to GND)

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires

Packing list for RFID Reader

1* RFID Reader

1* User Manual

1*Gift Box

Remind:

1.The package not including any screws .

2.This reader not support NFC cards and tags .

Application

Certification



Wire diagram

RFID reader photo