Product Description

The basic principle of the cyclone is to separate liquid-liquid, liquid-solid, liquid-gas and other two-phase or multi-phase mixtures with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially entered into the male flow device at a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. Under the action of the spin-reduction field, the components with high density in the mixture move downward in the axial direction, move outward in the radial direction, and move down along the wall of the vessel when they reach the cone section, and are pushed out from the underflow port, thus forming a External vortex flow field: the groups with small density move toward the central axis, and form an upward-moving inner vortex at the center of the axis, which is then swept out from the overflow port, thus achieving the purpose of two-phase separation.

Two-Product Dense Media Cyclone
working principle:
The coal and gangue in the heavy medium cyclone are affected by gravity and centrifugal force. When the particle density is greater than the density of the suspension, the direction of the acting force is the same as the direction of centrifugal acceleration. The particles do centrifugal motion in the cyclone medium and concentrate in the outer layer. Due to the interference and subsidence, the large gangue is close to the wall of the vessel, followed by the gangue with medium and small particle sizes that converge to form a spiral motion gangue belt. discharge. When the particle density is less than the suspension density, the particles move centripetally in the cyclone and concentrate near the central axis of the cyclone, forming a clean coal belt in a spiral motion. When the coal slurry moves to the overflow pipe, the clean coal is pressed to the overflow pipe and discharged along the overflow pipe.
Uses and Features:
Wide application range, can be widely used in the separation of high-sulfur coal, difficult to separate or extremely difficult to separate coal;
Applicable to the renovation of old plants: re-selection of jigging products (coarse clean coal or medium coal) (can increase the recovery rate of clean coal by 3% to 5%);
Large processing capacity, high sorting efficiency, low sorting lower limit, and high degree of automation;

3.Concentrated tailings concentration and dewatering
The combination of cyclone, concentrator and filter can efficiently complete the concentration and dehydration process. After the concentration and dehydration of the cyclone, the increase of the underflow concentration creates good conditions for filtration, which can greatly increase the filter capacity, and the reduction of the overflow concentration can effectively reduce the load of the concentrator, and can obtain higher underflow concentration and miscarriage rate.

 

In order to meet the production needs of customers, our company stocks a large number of various types of cyclone accessories, and can be customized production, supporting the products of major cyclone manufacturers at home and abroad (processing according to drawings).

Introduction of microcrystalline wear-resistant ceramic linings and linings
1. The microcrystalline alumina wear-resistant lining and lining are special wear-resistant ceramics formed by dry pressing and calcined at 1500-1700 ºC. Its Rockwell hardness is HRA80-90, which is only as hard as diamond;
2 The product has the characteristics of special wear resistance, impact resistance and convenient construction. Its theoretical wear resistance is equivalent to 260 times that of manganese steel and 170 times that of chrome steel. According to the actual application calculation, it can effectively extend the service life of the easily worn parts of the equipment by more than 10 times;
3 Application areas: It is mainly used on the inner and outer surfaces of material conveying pipelines and related wear-resistant equipment in coal washing, iron and steel plants, thermal power, chemical environmental protection, cement and other industries.
Microcrystalline wear-resistant ceramic lining, lining technical parameters

Shanxi Huazhan Wear-resistant Material Technology Co., Ltd. is located in Gudan Industrial Park, Taiyuan City, Shanxi Province. Covering an area of 25,000 square meters, there are more than 30 engineers and technicians. In the past 20 years, we have been committed to the customization, production and service of wear-resistant and heat-resistant steel products, specializing in providing solutions for wear-resistant and heat-resistant products in power, metallurgy, mining, steel mills, petrochemical, new energy and other industries. A major breakthrough has been made in core technologies such as Wen: the introduction of advanced production technology, a monthly production of 300 tons of wear-resistant pipes, and advanced testing equipment. Our products involve more than 110 varieties in 12 categories and are currently the largest manufacturer of wear-resistant pipe fittings in China.
The company has an independent R&D and design team, 70% of the front-line employees have 10 years of casting experience, the products have passed the Is09001 quality system certification, and have a number of invention patents. The company has always pursued the "quality first, reputation first" business policy, strict quality management, and formed a strict quality restraint mechanism and a reliable quality assurance operation system. Because of reliable product quality, honest business philosophy, and scientific and technological effects, it has won the trust of users, and the scale of the enterprise is developing rapidly. project.

1. What is your mode of transportation?

Answer: Shipping, shipping

2. Why is your price higher than others?

Answer: Because the quality of the products must be guaranteed, the raw materials we use are all of high quality and strictly controlled. We cannot achieve the lowest price, but we will ensure that the quality is passed. So there will be differences in prices. The quality of raw materials differs greatly in price.

3. Can it be made in strict accordance with the caliber, specification and length provided by me?

Answer: General conventional products are implemented according to standard specifications, and non-conventional products can be customized.

4. I have a large demand, can I offer a discount?

Answer: Yes, depending on your specific needs, large quantities can be discounted.