Waterproof & Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material

Model NO.
S211
Material
Epoxy
Classification
Room Curing
Main Agent Composition
Natural Polymer
Characteristic
Weatherability
Promoter Composition
Curing Agent
Composition
Organic Material
Color
White
OEM
Available
Delivery Time
2-3weeks
Shelf Life
12 Months
Tack Free Time
<5hours
Type
Cartridge/ Sausage
Curing Time
24 Hours
Carton Per Piece
24PCS/Ctns
Volume
240ml/280ml/300ml
Transport Package
Cartridge
Specification
240ML/280ML/300ML
Trademark
GNS
Origin
Guangdong
HS Code
3506100090
Production Capacity
600000
Reference Price
$ 5.40 - 7.20
Contact Us

Product Description

Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material

GNS S211 Gap Acrylic Sealant
 
Product Description

Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material
 

GNS S211 Acrylic Sealant

S211 is an one part,general purpose,water based acrylic sealant that cures to a flexible and tough rubber with good adhesion to porous surface without primer.

Detailed Photos

 

Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material

PRODUCT FEATURES OF ACRYLIC SEALANT
*One part.
*Waterproof & Paintable.
*Excellent adhesion to most construction materials.
*Superior gunning & tooling.

TYPICAL PROPERTIES OF ACRYLIC SEALANT

Color: White
Odor: Mild
Consistency: Smooth Paste
Flash Point: Above 100ºC
Vehicle: Acrylic Latex Polymer
Solvent: Water
Dry to touch: 30-60 minutes
% Solids: 82% +/-1%
Recommended Storage Temperature: 25ºC
Shelf Life: 12 Months



 
PACKAGING

460g,24pcs/ctn

COLORS           
A vailable for four standard colors: White 


STORAGE AND SHELF  LIFE
12 months from manufacture date when store in cool dry locations below 25ºC, keep away from heat source and direct sunlight during storage.
Installation Instructions

Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material





Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material

APPLICATION
Before use, open cartridge by cutting off plastic nipple above screw thread with a sharp knife. Attach nozzle to cartridge and cut it slantwise (opening at least Ø 5 mm).
Apply adhesive evenly in dots or lines every 20-40 cm, depending on weight of material. Always apply adhesive in corners and along edges. Join parts immediately with a sliding movement and press or tap firmly. Adjustments can still be made. In case of materials under tension or two non-porous materials, apply the 'Power Bonding Method': fix material, press and pull off immediately. Let dry for 5 minutes, fix in the same place and press or tap firmly. Adjustments cannot be made. If necessary, secure or support heavy materials.

SURFACE PREPARATION
Clean all grease, dirty, water, c lunky  sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts. For best results wipe all surfaces with GNS cleaner, methylated spirits, use a lint free cloth, then wipe again with a dry lint free cloth.   Detergent or soap water treatments are not recommended.
COMPATIBILITY TESTING
Incompatibility of glazing materials can lead to sealant discoloration and/   or loss of adhesion. To help protect against these problems and to ensure compatibility, GNS will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.) and other GNS s ilicone sealants.



Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material
Caution
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical advice. Use in well ventilated area and keep out of reach for children.
LIMITATIONS
  1.    Not recommended for use on  structural application.
  2.    Do not use in the manufacture of Insulated Glass (IG) Units.
  3.    Do not use when substrate temperature is above 50ºC or surfaces that are plasticizers, oily, greasy, dusty or dirty.
  4. Do not use for painted surfaces, otherwise may cause seal failure as the paint cracking or paint stripping.
  5. Do not use for confined space or surfaces that require post finishes or paintings.
  6.    Do not clean or treat the sealant with materials, solvents or cleaning agents that may affect or discolor the sealant, particularly during sealant cure.
  7. Not for fireproofing seal system.
  8.    Not for frost-laden or wet surfaces.
  9.    Not intended for food-contact applications.
 
Company Profile

Gunuo (Tianjin) Industrial Co., Ltd. is a group of company in China which specializes in PU foam, silicone sealant, acrylic
sealant, PU sealant, adhesive and so on. We have two manufacturing plants located in Tianjin and Foshan China. Our factory covers
200,000 square meters with 32 advanced full automatic PU foam production lines. We produced and sold out more than 160 million
cans in 2023 with 55% market share. Our annual silicone sealants production capability is 20000 tons. Our products meet American
Standard, European Standard, China Standard and some other International Standards.

Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material Waterproof &amp; Paintable with Good Adhesion Acrylic Sealant to Joint, Caulking in Building Material
FAQ

1. who are we?
We are based in Tianjin, China, start from 2010,sell to Domestic Market(90.00%),Mid East(3.00%),South America(2.00%),Southeast
Asia(2.00%),Africa(00.00%),Oceania(00.00%),Northern Europe(00.00%). There are total about 301-500 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PU Foam/Silicone Sealant/Other Adhesion Products

4. why should you buy from us not from other suppliers?
Biggest PU Foam factory in Asia with 32 advanced full automatic production lines. 19 years manufacturer; 55% market share of PU
foam in China.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:EUR,AUD,HKD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,Russian,Hindi,Italian

 

Adhesive