FEATURES & BENEFITS
*High initial tack.
*Eco-friendly, free from isocyanate, solvent, acids and halogens.
*Excellent primerless adhesion to numerous porous and non-porous substrates.
*Excellent elasticity, no bubble formation, waterproof, no shrinkage, over-paintable
*Primer less adhesion on many different substrates (preliminary test recommended)
Application Areas
INSTRUCTIONS
Before the application, the tip of the cartridges is cut and a plastic cap is fixed.
The tip of the cap is cut according to the width of the surface and fixed to the cartridge gun.
Apply the adhesive in strips or dots to the base or on the element to be bonded. The strips must be applied in vertical rows.
Bring together the parts to be joined as quickly as possible, at least within 10 minutes (this depends on the temperature and relative humidity level).
The parts can at this stage still be adjusted, but finally it should be pushed down well over the other or tapped with a rubber hammer.