High Rotary Speed Permanent Eddy Current Separator for Cooper Aluminum Rubber Stainless Steel

Model NO.
HECS
Material
Stainless Steel
Material Feature
NdFeB
Certification
ISO9001:2008, ISO9001:2000, CE
Energy Saving
Energy Saving
Warranty
1 Year
Color
Customized
Customized
Customized
Condition
New
After-sales Service
12 Months
Power
4-10kw
Gross Weight
1000-3000kg
Processing Capacity
4-25m³/H
Rotate Speed
3000r/Min
Transport Package
Wooden-Box
Specification
customized
Trademark
HENGCI
Origin
China
HS Code
8474100000
Production Capacity
4-10
Reference Price
$ 5,832.00 - 6,480.00
Contact Us

Product Description

  1. Introduction
High Rotary Speed Permanent Eddy Current Separator for Cooper Aluminum Rubber Stainless Steel
1.1   HECS type eddy current separator is a separation technology that uses the different conductivity of matter. Its separation principle is based on two important physical phenomena: the changing alternating magnetic field produces an alternating electric field; Magnetic field produced by current carrying conductor.When the eddy current separator works, a high frequency alternating strong magnetic field is generated on the surface of the magnetic roller. When the non-ferrous metal through the magnetic area, it will induce an eddy current in it. The eddy current itself will produce a magnetic field in the opposite direction, and the non-ferrous metal will leap forward along its transportation direction due to the repulsive force of the magnetic field, realize the separation with other non-metallic materials .  The main distinguishing criterion is the ratio value of the conductivity and density of the material. The higher is easier to separate than the lower.
1.2 S tructure composition :
    HECS is composed of the main body and the control cabinet; the main part mainly consists of the magnetic separation assembly, the drive motor, the frame, and the cover.The sorting assembly is the core part, which is composed of permanent magnet drum, material conveying system (including conveying belt, driving drum and deceleration motor).
  1. Scope of use
HECS is mainly used to recover copper, aluminum and other non-ferrous metals from domestic waste, industrial waste, electronic waste treatment, glass scraps, waste plastic doors and windows, boiler bottom ash, waste automobile. It mainly refers to the following:
 Electronic waste treatment (refrigerator disassembly line), separation of aluminum cans and iron metals, non-ferrous metals from boiler bottom ash, aluminum or copper blocks from scrap car chips, non-ferrous metals from glass scraps, non-ferrous metal impurities from some production lines (such as plastic recycling), non-ferrous metals from plastic doors and windows recycling, non-ferrous metals from wood.

3. Structure diagram

4.Working principle

    When the eddy current separator works, a high frequency alternating strong magnetic field is generated on the surface of the magnetic roller. When the non-ferrous metal through the magnetic area, it will induce an eddy current in it. The eddy current itself will produce a magnetic field in the opposite direction, and the non-ferrous metal will leap forward along its transportation direction due to the repulsive force of the magnetic field, realize the separation with other non-metallic materials .

 

5.Technical parameter

Type Capacity
m 3 /h 		Sorting drum diameter    mm Magnetic drum speed r/min Sorting drum speed r/min Drum power
KW 		Belt power
KW
HECS-40 ≤ 4 320 50-2800 60-150 4 1.1
HECS-60 ≤ 6 320 50-2800 60-150 5.5 1.1
HECS-80 ≤ 8 320 50-2800 60-150 5.5 1.5
HECS-100 ≤ 10 400 50-2800 60-150 7.5 1.5
HECS-120 ≤ 12 400 50-2800 60-150 7.5 1.5
  1. Installation and commissioning
6.1 Make Level: After unloading the equipment, first place on the horizontal plane, measure the level of the equipment with a level ruler, and if it is uneven, use an iron plate to pad it.
6.2 Fixed: After the eddy current separator is leveled, it starts to fix the equipment, and the fixing hole of the equipment footplate is fixed on the ground with the expansion bolt; if the embedded plate is embedded in advance, it is welded and fixed with the embedded plate.
6.3 Power connection: according to the electrical wiring diagram (see the drawing below), connect the 380V main cable to the position of air switch in the control cabinet. In addition, connect the output line of the control cabinet to the wiring positions of three motors respectively: drum drive motor, belt drive deceleration motor and vibration feeding motor.







6.4 Debugging: first turn on the control switch, then press the open button. If the belt deviates, adjust the deviation according to 7. Adjustment of belt deviation.
When adjusting the tightness of the conveyor belt, loosen all the connecting bolts of the sealing plates at both ends of the frame, and adjust the adjusting bolts of the bearing blocks to tighten them with a wrench until the belt is pressed down 10-15mm with the thumb.
6.5 Test run: adjust the position of the separating plate, put in a small amount of materials, and adjust the position of the separating plate according to the separation of materials
After adjustment, the equipment can work normally .
  1. Adjustment of belt deviation
When the belt is running, it will run off in the direction of the looser end on both sides of the equipment. When adjusting, first loosen the connecting bolt of the bearing seat at the feeding end of the belt. By adjusting the top bolt of the bearing seat, tighten it clockwise or loosen it anticlockwise to move the bearing seat so as to achieve the purpose of adjusting the deviation (as shown in the drawing below).

T test R oom :

High Rotary Speed Permanent Eddy Current Separator for Cooper Aluminum Rubber Stainless Steel High Rotary Speed Permanent Eddy Current Separator for Cooper Aluminum Rubber Stainless Steel High Rotary Speed Permanent Eddy Current Separator for Cooper Aluminum Rubber Stainless Steel


A bout us
Weifang Hengji Magnetoelectric Machinery Co., Ltd. is the earliest professional manufacturer of magnetic separation machine in China. The company introduces the most mature production technology of magnetic separation machine both domestically and internationally, integrating scientific research and development, production and manufacturing, market sales, and debugging services to provide customers with high-quality products and comprehensive services.
20 years of production experience, producing various products related to magnetic separators, widely used in power, steel, coal, cement, mining, new energy materials, etc

C ertification
High Rotary Speed Permanent Eddy Current Separator for Cooper Aluminum Rubber Stainless Steel High Rotary Speed Permanent Eddy Current Separator for Cooper Aluminum Rubber Stainless Steel
P ackaging& shipping

FAQ

1. What is the MOQ of your machine?
A: Our MOQ is 1 set.

2. How long is the machine warranty period?
A: The product warranty period is 12 months.


Information for RFQ:

1. What kind of material you are going to deal with?
2. What's the granularity of the material?
3. what kind of iron is contained, mechanical iron or iron oxide?
4. What's the size of the iron?
5. How much iron content after magnetic separation is up to standard?
6. Do you prefer dry or wet magnetic separation?
7. What's the producing capacity you are going to achieve?
 

 

Mineral Separator