High Hardness Clear Epoxy Resin for Metallic Floor Coating

Model NO.
113AB-2
Main Agent Composition
Thermosetting Resin
Characteristic
Waterproof
Promoter Composition
Curing Agent
Composition
Organic Material
Color
Clear
OEM
Available
Lead Time
3days
Curing Time
8hours
Mixing Ratio
3:1
Transport Package
5kgs 20kgs
Specification
ROHS, REACH, CPSIA, PAHS
Trademark
Jinhua glue
Origin
China
HS Code
3506912000
Production Capacity
10000kgs/Month
Reference Price
$ 6.30 - 8.10
Contact Us

Product Description

Feature
Epoxy resin 113AB-2 can be cured under normal temperature and elevated temperature, with good flowing property, natural defoaming, high hardness, no ripple, bright in surface.

Application
113AB-2 can be widely used for furniture, signs, crafts, crystal floor coating, et c


Detailed information
Model 113AB-2 Main agent 113A-2 Curing agent 113B-2
Properties before Hardening
Color Colorless transparent  Colorless transparent 
Specific gravity 1.15 0.96
Viscosity(25ºC)  1500-4000CPS 100 MAXCPS
Conditions of Usage
Mixing ratio A: B = 100:33(weight ratio)>3:1
Hardening conditions 25 ºC×12H to 16H or 55ºC×2H (2 g)
Usable time 25ºC×50min (100g)
Properties after Hardening
Hardness, shore D >86
Withstand voltage, KV/mm 22
Flexural strength, Mpa 75
Volume resistivity, Ω·cm 1.2x1014
Surface resistance, Ohmm 2 5X1015
Withstand high temperature, ºC 92
Moisture absorption, %  <0.15
Compressive strength, Mpa 40

High Hardness Clear Epoxy Resin for Metallic Floor Coating
High Hardness Clear Epoxy Resin for Metallic Floor Coating
High Hardness Clear Epoxy Resin for Metallic Floor Coating
High Hardness Clear Epoxy Resin for Metallic Floor Coating High Hardness Clear Epoxy Resin for Metallic Floor Coating


Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ºC, please heat A glue to 30 ºC first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection
caused by moisture absorption.
3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.
High Hardness Clear Epoxy Resin for Metallic Floor Coating

Caution
1.The operating environment should be ventilate and should keep away from fire. Closely sealed after use.
2. Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
3. If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4. Keep away from children.
5. Please take a trial before application to avoid usage mistake

Storage And Shelf Life
1. Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
2. Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.

Below is some factory photo for your reference.

High Hardness Clear Epoxy Resin for Metallic Floor Coating
High Hardness Clear Epoxy Resin for Metallic Floor Coating
High Hardness Clear Epoxy Resin for Metallic Floor Coating
Certificates
High Hardness Clear Epoxy Resin for Metallic Floor Coating

Free samples are available! Please contact us for more details and tell us what you need!
High Hardness Clear Epoxy Resin for Metallic Floor Coating




 

 

Adhesive