Desulphurization Pump
According to the special requirements of international industry standards and governing SO2, it has been proved by the FGD system operation of all coal-fired power plants in the world that moulded rubber-lined matched with the desulfurization pump is the most reasonable.Its cost is lower than metal lined and its life is three times as long as metal-lined.Three series of rubber-lined desulfurization pump have been designed & manufactured by our works. Series BHR(P)&BLR is horizontal, single-stage, single-suction, cantilever rubber-lined pump, and series SP& SPR is vertical, sump pump, their features are as follows:
1) Modern CAD technology, super hydraulic performance, high efficiency and outstanding energy-saving.
2) Mould rubber liner can be resistant to wear and corrosion.It is suitable for 2.5-13 PH value and 800ppm chloride.The casing is made of nodular cast iron.For special requirements, the impeller and front liner made of high alloy wear and corrosion-resistant unique materials can be provided.Therefore, the pump can be operated in longer life, low cost, trouble-free and outstanding benefit to society.
3) The bearing can be lubricated with grease or oil to maintain operation at reasonalbe low temperature.The clearance of the pump can be conveniently adjusted.The pump has super reliability.
4) In order to avoid leakage and pollution, the pump can be matched with mechanical seals with or without wear-filling, packing seal, and combined seal with expeller and packing on customer's option so as to be ensured reliable operation, free from leakage and maintance.
5) Series BHR(P) and BLR pumps can be operated in series within the permissible pressure according to the requirements.
6) Series BHR(P) and BLR pumps can be drived in direct drive and indirect with belt.Some speed control devices-gear box, hydrodynamic coupling or frequency converter can be selected so that the pump can be economically operated on the duty's requirements.
7) Series SP&SPR pumps are used in a sump.The shaft can be extended and supported on its middle as required.The pump has super reliability and steady operation.
8) The pump specially treated can be operated in the condition of seawater desulfuration, fume and electrochemistry in coastal region.
Introduction of Centrifugal Slurry Pump :
1. Abrasion and corrosion resisting
2. Material: hard alloy metal(Cr27,Cr28, Cr30, CD4MCu) or rubber liner optional,
3. Shaft seal: packing seal, expeller seal, and mechanical seal.
4. Power driver: electrical motor or diesel engine.
Application of Centrifugal Slurry Pump :
Deliver slurry with hard particle, in the mining, metallurgy, coal washing, power plant, sewage water treatment, dredging, and chemical and petroleum industries
1. Conveying mortar,slag which are strong corrosive and with solid particles.
2. Widely used in extracting sand, marine reclamation land,power plant,mining.
Features of Centrifugal Slurry Pump :
Drive type of Centrifugal Slurry Pump:
DC Type:
The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type:
The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type:
Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CR Type:
This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
FAQ
1. What Products does BODA pump mainly produce?
BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample.
2. Is BODA direct factory or trader?
BODA own foundry workshop, Machining Workshop, and Assembly workshop.
Welcome to visit our factory anytime.
3. The Min MQQ
The MQQ is one pcs spare parts or one set bare pump
4. What information is required for quotes?
If you need the spare parts, we need to know the parts Code and material.
If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better.
Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa