Description
When XCF flotation machine works, slurry is inhaled from the bottom of the cell to the space between impellers. Meanwhile, the low-pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole cell. When the froth rises to the stable level, after the enrichment processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the re-mix with air. The remained slurry flows to the next cell until becomes tailing.

XCF and KYF are enforced aeration flotation machine. It has a smaller diameter of impeller, thus lower peripheral speed, saving 30%-50% of power. Because and air distributor is equipped in the tank, air is evenly dispersed. The impeller acts as a centrifugal pump, so as to make the solid particles suspending. The tank is made as U type, reducing sand settlement to the least. Due to reasonable design of the impeller structure and the impeller space,impeller wearing is even, so, the service life of the impeller and stator are extended. Model KYF is unable to spontaneously suck slurry, while has low power consumption. In contrast, model XCF has the ability to automatically suck slurry, and may be allocated horizontally without need for foam pump, but consumes more power than model KYF. Therefore, model XCF and model KYF are combined into a set, i.e., XCF as the sucking tank, and KYF as the direct tank. The combined set can be arranged horizontally without foam pump either.

XCF Cell's Features:
It has the similar structure and performance with KYF cells and only the difference is the stator on the impeller to be a negative pressure zone. Pulp is sucked automatically but higher power consumption.
Note:

Mechanical agitation, no air inhalation but pulp sucked automatically.
It is combined with KYF Cells to be group as a suction cell.

KYF Cells' Feature:

Impeller is a cone shape with the backward inclined blades, strong agitation and simple structure.
Many air distributors are equipped on the impeller cavity, air disperse very well and well mixing of the air and pulp.
U type tank is made and lower sand settlement.
The diameter of the impeller is smaller thus lower peripheral speed.

Performance features:

Lower power consumption and saving 30-50% energy.
Well floated particles and higher recovery.
Light wearing of the spare parts so the service life of them are extended.

Note:

Mechanical agitation, no air inhalation and no pulp sucked automatically.
It is combined with XCF Cells as the direct cells.

Application:
It is widely used in enrichment for non-ferrous metals, black metals and non-metals in medium and big flotation factories for the roughing and scavenging concentration.



Main Technical Parameters of XCF Flotation Machine



Main Technical Parameters of KYF Flotation Machine
 








Warm reminding:
1. Please inform the product name, model and specification when you order.
2. Please inform the ore feeding direction; otherwise, we make from the left feeding.
3. We won't offer and install the middling and discharging pipes if customers don't tell the requirements and offer the flow sheet.


FAQ
Weclome to visiting our factory to check the machines or send to my email as follow information.
1.Capacity of project?
2.Particle size of original ore?
3.What kind of mineral ores ?
4.Kindly let me know the electric power of your country , here we are 380V 50HZ 3PHASE
We will suggest you the best type and good machines for respect customers.
Why choose our company machine?

1. We are factory (NOT Dealer)

All machinery from Well-tech international equipment Mining Machinery Manufactory are made by ourselves, No trade company make

Commission(many trade companies do not produce the machinery),the lower price with the same goods, good quality, after service can be assured (after service of trade companies will get help from factory).
So please buy from factory
2. We will do our best to satisfy every customer's needs

Producing high-quality and reliable machines is our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost.


3. Training & service
Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

4. If you are new for this business, I will help you

Many thanks for your trust; we can provide you with the pre-services of design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, Loader, trucks, excavators and so on


5. We will recommend a suitable type for you and send you a best quotation


Our Services

1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.


 
Thanks for your time.