The New Filter Housing has been redesigned to reduce differential pressure loss which, when combined with the new element design, significantly improves air flow and performance, making the YUKA one of the most energy efficient filter housings available.
Feture & Benefit
Flexible Installation
Available in 1/2" to 4" threaded Rc or
NPT port sizes, with flow rates of 35.3 - 1695 SCFM (1.0 - 48.0 Nm³/m).
Maximum temperature of up to 80°C (176°F) and maximum operating
pressure of up to 10.0 barg (143psig), dependent upon filter
model configuration.
Modular Filter
Low cost connecting kits and new filter head design
enables easy and simple close coupling assembly to accommodate a
wide range of application requirements.
Flow-optimised Design
Advanced filter design to optimise flow
capabilities, significantly reducing pressure loss and therefore increasing
energy efficiency.
Reliable Filtration Performance
Independently tested and validated
in accordance with ISO 12500-1 & ISO 8573-1: 2010, YUKA Filtration
filter housings and elements are manufactured using only the highest
quality materials to provide optimum performance and
improved efficiencies.
Low Total Cost of Ownership
Introducing new deep pleated media
technology across Alpha elements; a step change in performance,
combined with a custom engineered anti re-entrainment layer for
exceptional oil coalescence - providing a saturated differential pressure
of less than or equal to 205 mbar.
Filter Element Performance
PF
|
AO
|
AA
|
AX
|
ACS
|
AR
|
AAR
|
As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible
|
High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21
ºC)
,1ppm(w).
|
High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21
ºC
),0.01ppm(w)
|
Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21
ºC
),0.001ppm(w)
|
Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21
ºC
)
,
0.003ppm
(
w
)
|
Dust particles whose diameter more than 1μm can be removed
|
Dust particles whose diameter more than 0.01μm can be removed
|
International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance
parameters are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.
Product are test with the international advanced testing equipment based on standard ISO12500, Which is equivalent to the standard ISO8573.1-2010 quality standard, and provide filter performance test report.
Filtration Grade
|
PF
|
AO
|
AA
|
AX
|
ACS
|
AR
|
AAR
|
Size of solid particles(ISO12500-3)
|
5μm
|
1μm
|
0.01μm
|
0.01μm
|
-
|
1μm
|
0.01μm
|
Filtration performance of solid particles(ISO12500-3)
|
-
|
99.999+%
|
99.999+%
|
99.999+%
|
99.999+%
|
99.999+%
|
99.999+%
|
Filtration performance of oil(ISO12500-1)
|
50%
|
80+%
|
99.9+%
|
99.99+%
|
-
|
-
|
-
|
Residual oil content(ISO12500-1)
|
5mg/m³
|
0.6mg/m³
|
<0.01mg/m³
|
<0.001mg/m³
|
<0.004mg/m³
|
-
|
-
|
Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).
For application in other working pressure, please refer to the correction factors.
Model
|
Pipe size
|
Flow rates
|
Dimension (mm)
|
L/S
|
m
3
/min
|
scfm
|
W(Width)
|
D(Depth)
|
H(Height)
|
A
|
B
|
C(clearance for housing)
|
YF010
|
RC1/2"
|
16.7
|
1.0
|
35.3
|
96
|
79
|
261
|
29
|
198
|
118
|
YF020
|
RC3/4"
|
25.0
|
1.5
|
53.0
|
96
|
79
|
261
|
29
|
198
|
118
|
YF030
|
RC3/4"
|
30.0
|
1.8
|
63.6
|
96
|
79
|
295
|
29
|
233
|
153
|
YF040
|
RC1"
|
33.3
|
2.0
|
71.0
|
96
|
79
|
295
|
29
|
233
|
153
|
YF060
|
RC1"
|
60.0
|
3.6
|
127.0
|
138
|
111
|
403
|
37
|
296
|
208
|
YF070
|
RC1"
|
83.3
|
5.0
|
177.0
|
138
|
111
|
503
|
37
|
396
|
303
|
YF080
|
RC1-1/2"
|
125.0
|
7.5
|
265.0
|
138
|
111
|
503
|
37
|
396
|
303
|
YF090
|
RC2"
|
166.7
|
10.0
|
353.1
|
174
|
142
|
736
|
58
|
607
|
469
|
YF100
|
RC2-1/2"
|
216.7
|
13.0
|
459.0
|
174
|
142
|
736
|
58
|
607
|
469
|
YF110
|
RC2"
|
283.3
|
17.0
|
600.0
|
174
|
142
|
1016
|
58
|
887
|
794
|
YF120
|
RC2-1/2"
|
316.7
|
19.0
|
671.0
|
174
|
142
|
1016
|
58
|
887
|
794
|
YF130
|
RC3"
|
416.7
|
25.0
|
883.0
|
220
|
184
|
793
|
74
|
649
|
514
|
YF140
|
RC4"
|
466.7
|
28.0
|
989.0
|
220
|
184
|
793
|
74
|
649
|
514
|
YF150
|
RC3"
|
683.3
|
41.0
|
1448.0
|
220
|
184
|
1050
|
74
|
906
|
764
|
YF160
|
RC4"
|
800.0
|
48.0
|
1695.0
|
220
|
184
|
1050
|
74
|
906
|
764
|
Technical requirements
|
Maximum operating pressure: 10 barg Operating temperature: 1.5°C~80°C.
|
Pressure
|
Barg
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
Psig
|
15
|
29
|
44
|
59
|
73
|
87
|
100
|
116
|
131
|
145
|
160
|
174
|
189
|
203
|
219
|
232
|
Correction factor
|
0.38
|
0.53
|
0.65
|
0.76
|
0.85
|
0.93
|
1.00
|
1.07
|
1.13
|
1.19
|
1.23
|
1.31
|
1.36
|
1.41
|
1.46
|
1.51
|
Replacements and spare parts
Product Application
YUKA Certificates
YUKA Patents
YUKA Factory
YUKA Facility
YUKA in Shanghai ComVac Asia & Hannover Messe Exhibition
What's YUKA Advatage?
1. Compressed air National standard founder;
2. Build a laboratory with Wuhan University;
3. With many patents and strong R&D ability;
4. Advanced thread processing technology and testing equipment
What's YUKA Product Advatage?
1.15 years serve life for filter housing under working condition from temperature 1.5~80ºC. Maxi. Pressure is 1.0Mpa.
2. 6000~8000 hours serve life for filter element,filtering performance up to 99%
3. Integrated die-casting filter up to 4 inch,flow rate up to 48m³/min;
4. Effectively filter solid particles up to
0.01 microns
, suspended oil up to
0.003 mg/m³
;
5. 7 filter element filter levels to meet different needs;
6. Surface anti-corrosion treatment increases wear resistance and the corrosion of the shell is low;
7. Equipped with an external drain to effectively remove condensate;
8. Sight Glass shows the drainage inside the filter;
9. The presence of a pressure indicator indicates when the filter element should be replaced;
10. The filter element can be replaced without the intervention of third-party personnel and special tools;
Ability to install filters on the wall;
11. Less pressure drop when the airflow passes.